Showing posts with label BREL Derby. Show all posts
Showing posts with label BREL Derby. Show all posts

Class 158 Express Sprinter

The Class 158 diesel multiple unit (DMU) is one of the mainstays of cross country routes, having being built as express DMUs in the early 1990s to replace loco-hauled trains and older DMUs on provincial and regional services [1]. Nearly two hundred sets were built, they currently serve with multiple Train Operating Companies across Britain. Some have been converted to Class 159.

Scot Rail 158 735 at Nairn



Information
Number built: 354 (182 2 and 3 car sets)
Built: 1990-92
Builder: BREL Derby
Engine: Cummins NTA855R1/3 or
Perkins 2006-TWH diesel engine per power car
Power: 350 hp (260 kW) or 400 hp (300kW) per vehicle
Formation: 2-car : Driving Motor Standard Lavatory (DMSL)+DMSL
or DMSL+Driving Motor Composite Lavatory (DMCL)
3-car : DMSL+Motor Standard (MS)+DMSL
or DMSL+DMSL+DMSL

The Class 158 operates as either a two or three-car set, mostly with a Cummins engine though a few were fitted with Perkins engines instead. Currently the fleet is split into the 158/0 and 158/9 sub-classes. The latter were originally two-car sets but were beefed up into three-car by the addition of an extra driving coach though the cab of this is locked out of use.

The Class 158 is in operation with Northern, Scot Rail, Transport for Wales, South Western Railway, Great Western Railway and East Midland Railway. Twelve three-car sets were also built by BREL Derby for the Thailand state railway and also continue in service.

EMR 158 857 at Uttoxeter

Transport for Wales 158 840 at Shrewsbury

Aboard a TfW 158

EMR 158 773 departs Netherfield

Northern 158 816 at Sheffield



[1] Colin J Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 140

Class 46 (BR/Sulzer 2,500hp Type 4 Diesel-Electric)

Following on from the success of the ten Class 44 pilot scheme Type 4 diesels, British Railways went ahead with a production order which was split between 127 Class 45s and fifty six Class 46s (there were originally going to be twenty more built but the order was changed to the Class 47 instead). The Classes 45 and 46 are very similar, mainly differing from the electrical equipment used, Crompton Parkinson for the 45 and Brush for the 46 [1].
D182 at Kidderminster Town



Information
Number built: 56
Built: 1961-63
Builder: BR Derby
Motor: Sulzer 12LDA28-B diesel
Power: 2, 500 hp (1, 864 kW)
Wheel arrangement: 1-Co-Co-1

From their entry into service in the early 1960s the Class 46s could be seen on cross-country expresses and long-distance freights though these services switched over to newer motive power like the HSTs during the 1970s and withdrawals of the Class 46 began in 1977, by 1984 all had been withdrawn from revenue earning service. All Class 46s were fitted with steam heating only which became a problem as the number of steam heated coaches was gradually reduced by BR [2].

D182 at Kidderminster Town, at the time wearing this earlier BR blue livery



Most Class 46s were scrapped though one, 46 009, was destroyed as it was deliberately driven at speed into a nuclear flask (the locomotive was unmanned of course) to test the strength of the nuclear flask [3] in the event of a rail crash.

After revenue service withdrawal, a couple of Class 46s entered service with the Railway Technical Centre to provide motive power for test trains, 46 035 Ixion was also used for a number of experiments including the performance of separately excited traction motors and equipment to reduce wheel spin [4]. Three Class 46s (including both of the RTC 46s) have been preserved.
46 010 at Kidderminster Town

D182 at Kidderminster Town again

46 035 at Rowsley South

D182 again at Kidderminster Town



[1] Brian Haresnape, Production Diesel-Electrics Types 4 and 5 (Ian Allan, 1984) p. 31
[2] John Vaughan, Diesels on the London Midland (Ian Allan, 1981) p. 75
[3] John Glover, BR Diary 1978-1985 (Ian Allan, 1985) p. 93
[4] Colin J Marsden, 25 Years of Railway Research (OPC, 1989) p. 81

London Underground 1992 Tube Stock (Central Line)

The 1992 Tube Stock (1992TS) was built for the Central Line in the early 1990s to replace ageing 1962 Tube Stock. As well as units for the Central Line, an order of stock was added for the Waterloo & City Line too, then still British Rail owned, as the Class 482. The 1992TS is based on the three 1986 Prototype Tube Stock trains which ran a series of trials in the late 1980s [1]. The 1992TS were the first production tube stock fitted with solid state traction equipment [2].
91239 departs Shepherd's Bush




Information
Number built: 680 cars (8-car sets)
Built: 1991-94
Builder: BREL Derby / ABB Derby
Motor: 4 Brush LT130 traction motors per car (630v DC fourth rail)
Power: 1, 984 hp (1, 472 kW)
Formation: Driving Motor (DM)+Non Driving Motor (NDM)+NDM+NDM+NDM+NDM+NDM+DM

Eighty five eight-car sets were built for the Central Line making up 680 cars in total, 175 being Driving Motors and the rest Non Driving Motors. Some NDMs are also fitted with de-icing equipment. The make-up of an eight-car formation can vary though DMs are always at the outer ends of course. The NDMs lack cabs but do have shunting controls accessible via an external cabinet.

The 1992TS has not been a trouble-free design for London Underground, despite the fact it was based on years of work with the prototype fleet, there were a number of teething problems that delayed and hindered the entry into service. In 2003 a train of 1992TS derailed at Chancery Lane, after a traction motor became detached from one of the bogies following a sheered bolt, injuring 32 passengers [3][4]. The entire fleet was taken out of service (both Central and Waterloo & City fleets) for bolts to be checked and faulty ones replaced. In 2010-11 the bogies were replaced by a new design by Siemens [5]. However, the 1992TS is the worst performing fleet on LU in terms of reliability and availability [6].

The 1992 Tube Stock fleet could be replaced as part of Deep Tube Upgrade in the next decade, at one time the 92TS fleet was planned to replaced by the early 2030s [7] though at the moment there are no firm plans for replacement. To keep the fleet going the Central Line Improvement Programme (CLIP) is being carried out by Bombardier. The upgrade includes replacing the DC traction system with a Mitrac AC system [8], on board computer, communication system and refreshing and updating the interior to make it RVAR compliant.
91267 departs Lancaster Gate

91325 at Ealing Broadway

91013 at Leytonstone

Aboard a DM

Departing Queensway


[1] John Glover, ABC London Underground (Ian Allan, 1997) p. 64
[2] Piers Connor, The London Underground Electric Train (Crowood Press, 2015)  p. 105
[3] "Thirty hurt after Tube crash" BBC News <http://news.bbc.co.uk/1/hi/england/2694361.stm>
[4] John Glover, London's Underground 12th Edition (Ian Allan, 2015) p. 76
[5] Connor p. 105
[6] Central Line Heavy Overhaul Programme Lift (TfL Paper) <http://content.tfl.gov.uk/rup-20150212-part-1-item10-central-line-overhaul.pdf>
[7] Kim Rennie, Underground and Overground Trains (Capital Transport, 2017) p. 19
[8] "Bombardier for Central Line retractioning", Modern Railways (October 2017) p. 83

Class 44 (BR/Sulzer 2,300hp Type C(4) Diesel-Electric)

The first of the "Peaks", the Class 44 was the most powerful batch of diesels built in the British Railways Modernisation Plan diesel pilot-scheme, but also the heaviest! [1] Weighing in at 133 tons (and that was with some modifications to reduce weight) the Class 44 were imposing locomotives with their 1Co-Co1 bogie wheel arrangement ,which had extra load bearing wheels (similar to the Class 40 and the Bulleid prototype main line diesels). The Class 44 derived a lot of it's internals from the LMS prototypes 10000/1 and the SR Bulleid locomotives 10201-3.
D4 at Kidderminster Town




Information
Number built: 10
Built: 1959-60
Builder: BR Derby
Engine: Sulzer 12LDA28 diesel
Power: 2, 300 hp (1, 715 kW)
Wheel arrangement: 1Co-Co1

Although there were some early issues with the bogies, which could crack or catch fire if maintenance was lax, the Class 44s were a successful design and were followed on by the uprated series production Class 45 and 46. All three classes of locomotives are known as the Peaks, the name due to the Class 44s being named after British mountains.



When they first entered service they were used on express passenger services. They were supplanted by more powerful machines after a few years and spent most of their careers, especially on their final years, on freight duties in the London Midland Region area [2]. Scrapping began in the late 1970s as the Class 44s were surplus to requirements, with the last leaving service in 1980 [3]. Two have been preserved.

D8 at Rowsley South
Another view of D8

D4 arrives at Kidderminster Town

Nose view of D8
D8 stands ready for a new service

[1] Brian Haresnape, Early Prototype & Pilot Scheme Diesel-Electrics (Ian Allan, 1981) p. 77
[2] John Vaughan, Diesels on the London Midland (Ian Allan, 1981) p. 62
[3] John Glover, BR Diary 1978-1985 (Ian Allan, 1985) p. 47

Intercity 125 (Classes 253, 254, 255)

As built, the Intercity 125 High Speed Train were originally classified as diesel electric multiple units. They of course had two power cars, one at either end, sandwiching unpowered coaching stock. Class 253 was used for trains allocated to Western Region and Class 254 for Eastern Region (the prototype set was classified Class 252). Later on, the power cars were reclassified as locomotives (because they are) as Class 43. The DEMU class numbers are still used in some Network Rail documents though the unit numbers are no longer carried except on historical liveries.
Carrying set number 253 001 under the nose, 43 002 at London Paddington


Information for Class 255
Number built: 12 sets
Built: 1975-82
Builder: BR Crewe & Derby
Motor: 2 Paxman 12VP185 or MTU 16V4000 R41R diesels
Power: (12VP185) 4, 200 hp (3, 130 kW)
(MTU) 4, 500 hp (3, 352 kW)

Class 255 has been given to GWR's short formed (four coaches instead of seven or eight in a traditional HST) sets which entered service in 2019.
Class 255 including 43 029 at Newport

Preserved power car 43 018 at Crewe Heritage Centre carrying set number  253 009



LMS Leyland Articulated Railcar

The LMS built this railcar, which consisted of three articulated sections each with two motors, at it's Derby Works in 1938. The railcar was based mechanically on railcars built for the LMS Northern Counties Railway in Northern Ireland in 1933. The two driving cars had a streamlined design and were 19.51m long, the middle section being shorter (15.85m).
The Leyland Articulated Railcar [2]



Information
Number built: 1
Built: 1938
Builder: LMS Derby
Motor: 6 Leyland diesels
Power: 750 hp (559 kW)

Dspite a number of technical issues during testing, the railcar entered service in 1939, based at Bedford sometimes working a London St Pancras to Nottingham service [1] and also on the Varsity Line [3]. 

However, it's working life was short as it was withdrawn at the start of the Second World War. The railcar never re-entered revenue earning service. The two driving ends were converted into an overhead line maintenance train. The streamlined cabs were replaced by flat ends. It remained in this role until 1959 and then languished in a derelict state until final disposal in 1967.

[1] Colin J Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 12
[2] "British streamlined diesel train", Meccano Magazine (June 1938) p. 316
[3] Brian Haresnape, Diesel Multiple Units: The First Generation (Ian Allan, 1985) p. 10

Class 24 (BR/Sulzer 1,160hp Type B(2) Diesel-Electric)

The Class 24 was part of the original wave of diesel locomotives built as part of the British Railways Modernisation Plan in the 1950s. The initial twenty were Type B (later Type 2) pilot-scheme locomotives and the design was sufficiently successful to gain a full production run of 151. The locomotive was further developed as the follow-on Class 25.
Preserved 5081 at Kidderminster Town


Information
Number built: 151
Built: 1958-61
Builder: BR Darlington, Derby and Crewe
Motor: Sulzer 6LDA28 diesel
Power: 1, 160 hp (865 kW)
Wheel arrangement: Bo-Bo

The Class 24 saw service across the network but mainly on the London Midland and Eastern Regions handling lighter freights and passenger services, and double heading on heavier trains. One problem which the locomotives had was a lack of sufficient brake force on longer loosely coupled freights which meant that diesel brake tenders were required [1]. The locomotives also served on the Southern and Scottish Regions, the latter batch having tablet catchers on the cab side for use on the Far North Line.

Compared to other Type 2s such as the Class 26, which had the same engine, the Class 24 had a number of disadvantages. The engine room air intakes and louvres were awkwardly situated making maintenance difficult [2] and filtering inefficient, they also suffered from having draughty cabs due to the little used cab end doors. 

Withdrawal of the Class 24s began in earnest in the 1970s with the last withdrawal from revenue earning service in 1980. A number remained in departmental use [3] until the last was withdrawn in 1987. Four have been preserved.
Another view of 5081

5081 (24 081) was the last loco to be withdrawn from revenue service in 1980

5081 at Kidderminster Town

5081 arrives at Arley



[1] Brian Haresnape, Early Prototype & Pilot-Scheme Diesel-Electrics (Ian Allan, 1981) p. 67
[2] Brian Haresnape, Production Diesel-Electrics Types 1-3 (Ian Allan, 1983) p. 33
[3] Colin J Marsden, Departmental Stock (Ian Allan, 1984) p. 106

LMS 1831

In 1931 the LMS, at it's Derby Works, rebuilt a steam locomotive as a diesel shunter, the first of a number of experimental diesel shunters built by the "Big 4" railway companies in the 1930s. The original steam locomotive was a Midland Railway 1377 class steam locomotive. The locomotive was rebuilt and fitted with a Paxman diesel engine and Haslam & Newton hydraulic transmission [1].
1831 after construction [3]



Information
Number built: 1
Built: 1932 (rebuild)
Builder: LMS Derby Works
Motor: Paxman 6-cyl diesel
Power: 400 hp (298 kW)
Wheel arrangement: 0-6-0

The locomotive had a very box-like body with small cab windows. The locomotive was not a great success. It was withdrawn from service in 1939 after a number of years in storage. It was converted into a mobile power unit [2] and survived in this guise until 1951.

[1] Brian Haresnape, Diesel Shunters (Ian Allan, 1984) p. 4
[2] Colin J Marsden, Diesel & Electric Locomotive Recognition Guide (Ian Allan, 2011) p. 8
[3] "A heavy oil shunting locomotive, Meccano Magazine (July 1933) p. 525

Class 442 5-WES Wessex Electrics

The Class 442 was built for Network South East services out of London Waterloo to Weymouth to replace Class 432 and some Class 33 + 4-TC services [1] (electrification of the route being extended from Bournemouth to Weymouth in the mid-1980s [2]). The Class 442s, which became known as the Wessex Electrics [3], were designed around the Mark 3b coach with a single power vehicle in a five car set. In keeping with Southern Region tradition the Class 442 included equipment recycled from the Class 432 units they were replacing. Equipment re-used included the traction system.
London Victoria bound

Information
Number built: 120 (24 5-car sets)
Built: 1988-89
Builder: BR Derby
Engine: 4 EE546 traction motors (750c DC third rail)
Power: 1, 600 hp (1, 200 kW)
Formation: Driving Trailer Standard (DTS)+Trailer Standard Open (TSO)+
Motor Luggage Composite (MLC)+Trailer Standard Wheelchair (TSW)+DTS

The Class 442s had some initial problems especially with hot axle boxes but became popular with passengers. The Class 442 was transferred to South West Trains following privatisation but were replaced by Desiro stock in 2007. They were rebuilt and modified at Wolverton and used on the Gatwick Express services out of London Victoria and some Southern services. They were replaced by Class 387s in 2017, however this was not to be the end of the Class 442 story.

There were various schemes and suggestions to use the 442s, including even a proposal to use them as hauled stock on trans Pennine routes! Finally it was announced that the new South Western Railway franchise (which replaced South West Trains in 2017) was to use refurbished sets on London Waterloo to Portsmouth services. Eighteen of the units were to be used by SWR, however their time in service was short (just a few months) due to technical issues and the drop in demand due to Covid. Despite an expensive retractioning and refurbishment of half of the fleet the Class 442s were withdrawn in 2021 and will be replaced by Class 458s [4]. It is now unlikely they will return to mainline service.
442 423 at London Victoria
Gatwick Express 442 clears Clapham Junction

Another Gatwick Express 442 at Clapham Junction

[1] Brian Haresnape & Alec Swain, Third Rail DC Electric Multiple Units (Ian Allan, 1989) p. 80
[2] Colin J Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 342
[3] John Balmforth, South West Trains (Ian Allan, 2011) p. 60
[4] "SWR abandons 442s but retains 458s", Modern Railways (May 2021) p. 86

Class 310 AM10

The Class 310 was built for high-density semi-fast services along the West Coast Main Line from London Euston to Northampton and Birmingham New Street [1]. The Class 310s were the first electric multiple units based on the British Rail Mark 2 coach, and had a lot of effort put into them by British Rail. The exterior design was thanks to the BR Design Panel and used curved glass on the windscreens (later a maintenance nightmare and was replaced by flat glass), a lot of work was put into the quality of the ride and the 310s were the first series built multiple units to have disc brakes [2].
310 109 in Regional Railways livery (KD collection)



Information
Number built: 200 (50 4-car sets)
Built: 1965-67
Builder: BR Derby
Engine: 4 EE546A traction motors (25kV AC OHLE)
Power: 1, 080 hp (810 kW)
Formation: (310/0) Battery Driving Trailer Standard Open Lavatory
(BDTSOL)+Motor Brake Standard Open (MBSO)+
Trailer Standard Open (TSO)+Driving Trailer Composite
Open Lavatory) DTCOL
(310/1) BDTSOL+MBSO+DTCOL

All 310s were originally 4-car sets, later a number was reduced to 3-car sets (310/1) for use on local services around Birmingham. The 310/0s later worked on the London, Tilbury and Southend line after being replaced on the WCML. 

In the post-privatisation era they were operated by LTS Rail and Central Trains but all were withdrawn by 2002. Unfortunately none have been preserved.

[1] Colin J Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 230
[2] Alec Swain, Overhead Line Electric Multiple Units (Ian Allan, 1990) p. 52

Class 488

As with the Class 438, the Class 488 were unpowered sets of trailers given TOPS numbers in the Southern Region EMU grouping. The Class 488 was formed from redundant Mark 2f coaching stock (many of which were now surplus after the arrival into service of the HST [1]) for the modernisation of services from London Victoria to Gatwick Airport. A dedicated Gatwick Airport Express was created with a fifteen minute interval [2]. Two (488/2) and three (488/3) car sets were formed and were sandwiched between a Class 73/1 locomotive and a Class 489 Motor Luggage Van.
488 202 preserved at Wirksworth, Ecclesbourne Valley Railway (with a 489)

Information
Number built: 77 (10 2-car and 19 3-car sets)
Built: (Mark 2 Coach) 1973-74
(Conversion) 1983-84
Builder: BR Derby
(Conversion) BR Eastleigh
Engine: N/A
Formation: (488/2) Trailer First Open Lavatory Handbrake (TFOLH)+
Trailer Second Open Lavatory Handbrake (TSOLH)
(488/2) TSOLH+Trailer Second Open Lavatory (TSOL)+TSOLH

The coaches were rebuilt for their new role with reduced seating, easier access and greater luggage space [3]. They had high-level control and air brake connectors fitted and were semi-permanently coupled with bar couplings and buck-eye couplings on the outer ends. They remained in service until 2005 when they were replaced by Class 460s. 

Following withdrawal a number have been preserved, others found new roles with Network Rail (ten coaches found new roles [4]) and Northern Ireland Railways.
Aboard 488 202, the teddy bears were not a feature in BR service!


Ex 488 309 coach 6070 now Network Rail Plain Line Pattern Recognition Vehicle 72639
Ex 488 316 coach 6094 now RTC Structure Gauging Train Support Coach 72630

[1] John Glover, BR Diary 1978-1985 (Ian Allan, 1985) p. 99
[2] Colin J. Marsden, Motive Power Recognition 2: EMUs (2nd Edition) (Ian Allan, 1986) p. 100
[3] Colin J. Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 372
[4] Colin J. Marsden (ed.), "Former EMUs with Network Rail", Modern Locomotives Illustrated 231 (Departmental Multiple Units) June-July 2018, p. 72

Class 142 (British Leyland / BREL Derby Local & Secondary Services 2-car)

The Class 142 Pacer was the most controversial train in Britain, a cheaply made diesel multiple unit from the 1980s still serving in 2020. Questions were asked repeatedly, from parliament downwards [1], about when it would finally be replaced. The controversy however, is somewhat unfair as when built the Class 142 was a way to provide cheap rolling stock for branch lines and services that may have otherwise been closed or had services withdrawn. The Class 142 has also served quite bit longer than was originally intended. The end finally came in December 2020.
Northern 142 005 at Wigan North Western

The Class 142 resembles a bus on rails [2], because in some ways that is what it is! The body is based on that of the Leyland National, a very common bus that could regularly been seen on Britain's roads from the 1970s until recently. The body is wider than earlier bus-based DMUs like the Class 141 [3]. The chassis is a development of a high speed freight vehicle designed in the late 60s and each carriage only has four wheels. The Class 142 provided a rather poor ride for passengers and excessive wheel squeal and flange wear on sharp curves.



There were 2 sub-classes, the 142/0 and 142/1, the distinction is mostly due to when they were built in two production series. One difference between the sub-classes is that the 142/1 has a simpler roof structure. The Class 142s were originally fitted with Leyland TL11 engines but were re-engined with Cummins diesels, they also originally had mechanical gearboxes but were later fitted with Voith hydraulic transmission.

Information
Number built: 192 (96 2-car sets)
Built: 1985-87
Builder: BREL Derby / Leyland
Engine: Cummins LTA-10R diesel per car
Power: 450 hp (330 kW)
Formation: DMS (Driving Motor Standard)+DMSL (Driving Motor Standard Lavatory)

The Class 142 has served with British Rail and a number of post-privatisation operators and in it's final years with Northern and Transport for Wales [4]. The Class 142 fell short of accessibility requirements for passenger trains being bought in in 2020. Withdrawals began in the late 2010s with the final examples being withdrawn at the end of 2020 (several months later than expected). Sixteen sets have entered preservation with some other cars having been converted into non-rail uses including a library!
Northern 142 022 at Meadowhall Interchange

Transport for Wales 142 072 at Cardiff Central

Aboard Northern 142 015

Northern 142 023 at York

Northern 142 041 at Liverpool Lime Street

[1] "Nick Clegg demands replacement of outdated "Pacer" trains", The Chronicle <http://www.chroniclelive.co.uk/news/north-east-news/nick-clegg-demands-replacement-outdated-8055969>
[2] Colin J. Marsden, Traction Recognition (2nd Edition) (Ian Allan, 2011), p. 102
[3] Brian Haresnape, Diesel Multiple Units: The Second Generation and DEMUs (Ian Allan, 1986), p. 64
[4] Colin J. Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013), p. 122

Derby Lightweight Railcar / "Iris"

In the early 1950s British Railways built a number of prototype Diesel Multiple Units (DMUs) which became known as "Lightweights" due to the method of construction using light alloy sheets. The first batch used Leyland engines and torque converter transmission but these were soon joined by a second batch which used BUT (AEC) engines and a pre-selector gearbox. This later batch proved to be much more what BR wanted and they set the standard for the production DMUs [1] for the next 40 years and beyond.
Iris at Duffield

Information
Number built: 2
Built: 1956
Builder: British Railways Derby Works
Motor: 2 BUT (AEC) horizontal 6-cylinder diesels
Power: 300 hp (224 kW)
Formation: Driving Motor Brake Standard (DMBS)

As well as a number of 2- and 4-car sets a couple of single railcars were also built for the Banbury (Merton Street) to Buckingham/Bletchley route. However, being non-standard they were withdrawn (like the other Lightweights) after just a few years in service [2] by the end of the 1960s.


Some of the Lightweight DMUs avoided scrapping and went into departmental service, one of the single cars became QXV RDB975010 Iris when it was transferred in 1967 to British Rail Research [3]. Following rebuilding it was used for radio control and survey research at Derby [4] later it was used for radio propagation, noise measurement and data transmission tests [5]. It has now been preserved at the Ecclesbourne Valley Railway and has been restored to it's original condition.
Iris at Wirksworth

Comparison of Iris to a Class 122 railcar (left)

Side of Iris

Iris at Duffield

Iris at Wirksworth

[1] Brian Haresnape, Diesel Multiple Units: The First Generation (Ian Allan, 1985) p. 23
[2] Colin J Marsden, DMU and EMU Recogition Guide (Ian Allan, 2013) p. 28
[3] Colin J Marsden, Twenty Five Years of Railway Research (OPC, 1989) p. 96 
[4] Haresnape p. 25
[5] Colin J Marsden, Departmental Stock (Ian Allan, 1984) p. 34