Showing posts with label Petrol. Show all posts
Showing posts with label Petrol. Show all posts

McEwan Pratt Petrol Locomotive for Assam Oil

McEwan Pratt was a short lived manufacturer (1905-1912 when they were bought out by Baguley Cars) of narrow gauge locomotives powered by the internal combustion engine. This locomotive was one of their earliest built and was ordered by the Assam Oil Company and was one of the earliest petrol engine powered locomotives to be built.
The locomotive [1]



Information
Number built: 1
Built: 1909
Builder: McEwan Pratt & Company
Motor: 4 cylinder petrol engine
Power: 50 hp (37 kW)
Wheel arrangement: 0-6-0PM

The locomotive operated on the company's metre gauge network hauling oil trains. The locomotive had two speeds and designed to haul up to 67 tons though to said to have comfortably exceed that when built.
Publicity photograph



[1] "Petrol locomotive for Assam", Railway Times (January 1 1910) p. 10

Great Northern Railway Petrol Rail Motor Coach

As well as steam motor coaches, the Great Northern Railway purchased this petrol motor coach for evaluation in the early 1900s. The motor coach did not enter regular service and was withdrawn in 1908.
At Doncaster [1]


Information
Number built: 1
Built: 1904
Builder: Dick, Kerr
Motor: 2 Daimler 4-cylinder petrol engines
Power: 70 hp (52 kW) 

The motor coach used Daimler motor equipment, with a pair of motors (one at each end of the motor car) driving the wheels via a clutch.
At Grantham [1]



[1] Philip Dawson, "The use of independent motor cars on railways", Street Railway Journal Vol XXIV No. 19 (November 5 1904) p. 822

Baguley Cars 800

This locomotive was built to order by McEwan Pratt & Co. for Dought Son & Richardson in 1920 (McEwan Pratt being a pseudonym for Baguley Cars). However, the locomotive was never delivered and instead remained at Baguley as a works locomotive until 1933. It was finally sold to the London Brick Company and remained in service with a number of owners until the mid-1960s until it entered preservation.

Information
Number built: 1
Built: 1920
Builder: McEwan Pratt & Co (Baguley Cars)
Motor: Baguley 4-cyl petrol engine
Power: 100 hp (74 kW)
Wheel arrangement: 0-4-0PM

Baguley Cars 800 is similar in form to the earlier 680 from the same manufacturer though more powerful. The engine was located next to the cab, ahead of it was a large water tank used for coolant. This gave the locomotive an appearance similar to the steam engines it was intended to replace.
Baguley 800 at Tyseley


Great Central Railway Petrol Autocar

In 1912 the Great Central Railway ordered this petrol-electric railcar, or autocar, from British Westinghouse, the bodywork sub-contracted out to the United Electric Car Company of Preston. The autocar had a six cylinder petrol engine powering a generator which fed two traction motors on one of the bogies. The autocar had a cab at each end and used a Westinghouse controller similar to that used in tram cars.
GCR Autocar [1]


Information
Number built: 1
Built: 1912
Builder: United Electric Car Company of Preston
British Westinghouse
Motor: 6-cylinder petrol
Power: 90 hp (67 kW) 

The autocar began trials in early 1912, initially used between London Marylebone and South Harrow [1]. The autocar could carry fifty passengers, although it could only travel at up to 72 km/h (45 mp/h) it had good acceleration. After the war it was used a shuttle service between Macclesfield Central and Bollington. It remained in service, by now in LNER ownership, until 1935. 
Engine compartment and cab [1]



[1] "Westinghouse Petrol-Electric Car for GC Railway", Electrical Review (Vol 70 No. 1796) April 26 1912, p. 664

Stirling and Bridge of Allan Tramways Petrol Tram

Stirling and Bridge of Allan Tramways began operations in Stirling in 1874. The company eventually had a seven kilometres, all operated by horse drawn trams. One of the trams, Number 22, was bought from the Edinburgh & District Tramways in 1902 to supplement the original fleet. Although the company did experiment with a steam tram, the horse remained the motive power for it's services although electrification was considered.

Information
Number built: 1
Built: 1913 (conversion to petrol)
Builder: Dick, Kerr
Motor: Commer petrol engine

In 1913 the company converted Number 13 to petrol operation with the addition of a Commer engine. The tram worked well though any other plans for conversion were scuppered by the First World War. Stirling and Bridge of Allan Tramways closed down in 1920.
Number 22 in operation (KD collection)


Robert Hudson Fordson "Go-Go Tractors"

The Fordson tractor was a mass produced tractor built by the Ford Motor Company from 1917 onwards, Robert Hudson adapted the engine, gearbox and drivetrain to create a locomotive that could run off petrol, diesel and other fuels. The "Go-Go Tractor", as it was referred to, was produced from the 1920s onwards. The Ford engine was connected to the tractor axle via a roller chain. The resulting locomotive was simple, one major drawback was that as it utilised the original tractor gearbox it had three gears in one direction and only one in the other, not so much a problem for an agricultural tractor but a limitation for a bi-direction locomotive.
36863 / 1929 at the Statfold Barn Railway

Information
Builder: Robert Hudson
Motor: Ford 4-cyl various fuels
Power: 20 hp (15 kW)
Wheel arrangement: 4wPM or 4wDM

The two Go-Go Tractors pictured operated on petrol or paraffin. Both are preserved at the Statfold Barn Railway and are 610mm gauge.
39924 / 1924 at Statfold Barn, formerly worked at Cairngryffe Quary in Lanarkshire

Another view of 36863


Motor Rail / Simplex Petrol Locomotives

From 1916 the Motor Rail company of Bedford (later known as Simplex) produced hundreds of small petrol engine railway tractors for the War Department. These were used by the British Army in France operating on 600mm gauge track behind the trenches. An armoured and uprated (40hp) version was also produced.
4217 (1931) at NRM Shildon

Information for post-WW1 standard gauge petrol shunter
Built: 1919-48
Builder: Motor Rail
Motor: Dorman 4JO petrol engine
Power: 40 hp (30 kW)
Wheel arrangement: 4wPM

Following the end of the First World War Motor Rail went on to built hundreds of standard gauge shunters which used the engine and gearbox of the 40hp tractor [1]. The type remained in construction until 1948 and some survived in service until the 1980s. Some were bought by the Great Western Railway in the early 1920s used in locations such as Bridgwater Docks and Didcot Provender Stores [2]. They survived into British Railways days though all were scrapped by 1960. The LNER also operated a couple, one purchased by it's predecessor company the GER in 1919 to replace a horse called Peggy! [3]

Number 4217 (1931) as shown worked at Berry Wiggins and Bulmers before entering preservation in 2004. It is now at NRM Shildon.

[1] Alan M. Keef, Simplex Locomotives at Work (Lightmoor Press, 1919) p. 9
[2] Paul Smith & Shirley Smith, British Rail Departmental Locomotives 1948-1968 (Ian Allan, 2014) p. 19
[3] Brian Haresnape, Diesel Shunters (Ian Allan, 1984) p. 76

Kent and East Sussex Railway Petrol Railmotor

The Kent & East Sussex Railway operated between 1900 and 1961 (after 1948 as part of British Railways), though a preserved railway with the same name opened in 1974. The railway, in common with a number of other railway companies in the early twentieth century operated a number of early railmotors, with petrol engines, along it's route. The line's general manager Colonel Stephens was a keen enthusiast of this new mode of travel which he hoped would reduce the cost of running services on the line.
Ford railmotor at Tenterden Town [1]


Information for Ford railmotor
Number built: 4
Built: 1923-24
Builder: Ford / Eaton Coachworks
Motor: Ford 4-cylinder petrol engine
Power: 20 hp (15 kW)
Wheel arrangement: 2-2wPMR

The railmotors were very similar to contemporary motor buses but with flanged wheels. Indeed the first was purchased as a Wolseley Siddeley motor bus but fitted with flanged wheels. In 1923 a pair of Ford railmotors were purchased from Edmonds of Thetford, these railmotors had bodywork by Eaton Coachworks with the chassis from a Ford Model T. Another pair were bought in 1924. The railmotors were operated until the mid-1930s. Finally a pair of railmotors built by Shefflex Lorries were purchased in 1930 and were operated until the late 1930s.

A replica of the Ford railmotor was built in the early 2000s and has operated on the present day preserved line. It is now preserved at the Colonel Stephens Museum at Tenterden.

[1] Railway Mechanical Engineer (Vol 97 No. 7 July 1923) p. 502

Baguley Cars 680

Baguley Cars 680, now preserved at the Statfold Barn Railway, is probably the oldest surviving standard gauge petrol locomotive in the world [1]. Like many industrial locomotives it had a long working life of over fifty years. It was delivered new, as a petrol or paraffin fuelled locomotive, to Richard Johnson & Nephew's armaments factory (Ministry of Munitions National Filling Factory No. 2) in 1916. It moved to W & R Jacob's biscuit factory in Aintree after the war and remained there until retirement in 1967.

Information
Number built: 1
Built: 1916
Builder: Baguley Cars
Motor: White & Poppe petrol/paraffin engine
(later) Baguley 4-cyl petrol engine
Power: 60 hp (45 kW) - petrol
55 hp (41 kW) - paraffin
(later) 40 hp (30 kW)
Wheel arrangement: 0-4-0PM

In 1927 it was hired out to the Cheshire Lines Committee to help with some civil engineering work. They managed to badly damage the locomotive and it had to be rebuilt. The original White & Poppe petrol/paraffin engine was replaced by a Baguley petrol engine which was less powerful but adequate for it's duties at the biscuit factory. No. 680 returned to work and remained in use for forty years as the spare locomotive on the company's internal network. No. 680 remained in service until the factory closed it's internal rail network in 1967 and was preserved.

Since retirement 680 has spent time at the Beamish Open Air Museum before arriving at the Statfold Barn Museum in 2011.
680 at the Statfold Barn Railway
[1] C.R. Weaver, "A veteran retires", Industrial Railway Record No. 21 (IRS 1968) p. 305

Brookville Petrol Switchers

The Brookville Locomotive Company (nowadays known as the Brookville Equipment Company) began operations in 1918 converting Ford gasoline trucks for rail use with flanged wheels. By the 1920s they were making their own locomotives [1], many of them small petrol engine powered shunters (switchers) which found their way into many industrial users fleets.

Information
Builder: Brookville
Motor: Ford petrol engine
Wheel arangement: 4wPM

Two locomotives are in the Statfold Barn Railway collection having once worked for Charles Matthews Ltd. in Thornhill, Ontario, Canada. Brookville 3526 (built 1949) and 3746 (build 1951) are narrow gauge (610mm gauge) switchers which were both bought over from Canada to the Statfold Barn Railway in Staffordshire for restoration and preservation.
Brookville 3526 at Statfold Barn Railway

Brookville 3746

Another view of 3526

[1] Amanda Anger & Adam J. Mohney, Brookville 100, p. 13

NER Petrol Inspection Car

The North Eastern Railway built the first of a number of petrol-engine powered inspection cars in 1908 [1]. The car was just over five metres long and included seating for NER officials (six permanent seats and two camp stools) as well as a map table in an open saloon, they also had a driving cab at both ends. In 1911 two more cars were built, these were larger and could seat up to twelve passengers and had more powerful White & Poppe engines.

Information
Number built: 4
Built: 1908, 1911, 1923
Builder: NER York
Motor: Four-cylinder petrol engine
Power: 40 hp (30 kW) 

One of these later cars was destroyed in a fire in 1921, a slightly larger replacement was built in 1923. In the late 1920s the cars' engines were replaced by Leyland motors. They survived in service, now with LNER, until 1939 when it was decided to withdraw them from use because of their unsuitability for use in any other duties. All three cars were scrapped.
Original 1908 petrol car [1]

Interior view

[1] "New Petrol Rail Inspection Car", Railway Times (April 1908) p. 386

NER Petrol Electric Autocar

At the start of the twentieth century a number of experiments were made with railcars fuelled by light fuels such as kerocene and gasoline, the perfecting of the diesel engine put paid to these experiments. In 1903 the North Eastern Railway built two petrol electric railcars at it's York works.

Information
Number built: 2
Built: 1903
Builder: NER York
Engine: Napier later Wolseley petrol engines
Power: 100 hp (76 kW)

The railcars (known as Autocars by the NER as they had cabs at each end) were the forerunners of the diesel electric multiple unit. The petrol engine being coupled to a Westinghouse generator which generated 60kW which fed a 50hp motor under each bogie [1].

They were put into use on the line between Scarborough and Filey. One of the Autocars was later fitted with a 225hp engine and could haul an unpowered trailer. They remained in service until 1930 and 1931. The coach body of one survived scrapping to become a holiday home and is currently undergoing restoration with a new chassis and powertrain.
Front of an Autocar, all images public domain from [1]

Wolseley engine and generator 
Inside the Autocar

Side view of the Autocar

[1] "Self-propelled Petrol Electric Railway Cars Operated by the North Eastern Railway Company of England", Street Railway Journal Vol XXIV No. 19 p. 842