Derby Lightweight DMU

This first wave of British Railways DMU (which appeared even before the Modernisation Plan) were known as the "Derby Lightweights" because they were built at BR Derby and had low weight thanks to aluminium bodies and short under frames [1]. The first batch were eight 2-car sets for Leeds-Bradford services and were an instant hit with the public with passenger receipts on the services they were used on increasing 400% in 7 years. Similar improvements with revenue were seen across the board after the introduction of later DMUs. Both cars in this initial batch were powered with Leyland engines and had torque converter transmission. Mechanically these units were based on pre-war LMS designs and proved troublesome in service [2].

Number built: 217 (1, 2 and 4-car sets)
Built: 1954-55
Builder: BR Derby
Engine: Leyland or BUT (AEC) 6-cyl horizontal diesels
Power: (Leyland) 250hp (186kW) (BUT) 300 hp (224 kW)
Formation: (Preserved set) Driving Motor Brake Standard (DMBS)
+Driving Trailer Composite Lavatory (DTCL)

The second batch were built in a variety of configurations (the single railcars have been dealt with separately). They were fitted with BUT (AEC) diesels and had a different transmission and gearbox (fluid flywheel and preselector gearbox). This arrangement proved more reliable and popular with BR and indeed became the standard for the hundreds of DMUs in the "first generation" which followed.

Being non-standard the Derby Lightweight DMUs were withdrawn fairly early and all had gone from revenue service by 1969. However a 2-car set and a railcar survived into departmental use. The 2-car set became an ultrasonic test train and traversed the entire network returning data on track conditions [3]. Following withdrawal in the mid-1980s it has been preserved and in the process of being restored.
Preserved M79018 at Wirksworth (a Class 122 to the left)

Another view of M79018

[1] Brian Haresnape, Diesel Multiple Units: The First Generation (Ian Allan, 1985) p. 22
[2] Colin J Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 26
[3] Colin J Marsden, Departmental Stock (Ian Allan, 1984) p. 28

Class 58

Following the conventional Class 56 heavy freight locomotive British Rail went much more radical for the next design. The Class 58 dispensed with a lot of traditional British monocoque locomotive building practice with the aim of producing a highly exportable locomotive. It had a modular design with the main structural load bearer being the underframe with major components fitted to the frame[1]. The design made the Class 58 around 14% cheaper to build than the 56 [2].

Number built: 50
Built: 1983-87
Builder: BREL Doncaster
Engine: Ruston Paxman 12RK3ACT diesel
Power: 3, 300 hp (2, 460 kW)
Wheel arrangement: Co-Co

The Class 58 also followed common US style in that it dispensed with a walkway through the locomotive, the body being narrower than the cabs. This was done because of the space problems with the Class 56 trying to fit a larger engine into what was essentially a Class 47 shell. The bonnet design has access doors all along the side[3]. In the event no export orders were received and only 50 were built (as opposed to 135 Class 56s), the last Class 58 was also the last diesel locomotive to be built at BREL Doncaster.

The Class 58 was built for heavy coal trains though also could be seen on other freight types. Most Class 58s were withdrawn at the turn of the millennium, surplus to requirements as the Class 66 began to arrive in numbers. While a small number have been scrapped most of the class has seen further use in the 2000s on the continent especially in France working on TGV construction though some of these have now returned home or been put into storage both home and abroad [4].

One Class 58 (58 022) will be used to help create a replica of the pioneer LMS diesel locomtive 10000.
58 007 at Bescot 1985, photographer unknown

58 022 at Rowsley South

58 022 will be used to build a replica LMS 10000 class diesel locomotive

[1] Colin J Marsden, Motive Power Recognition: Locomotives (3rd Edition) (Ian Allan, 1988) p. 92
[2] Brian Harsenape, Production Diesel Electrics Types 4 and 5 (Ian Allan, 1984) p. 80
[3] Barry Edwards, Class 58s: Their Development and Introduction (Link Rail, 1984) p. 6
[4] Colin J Marsden, Traction Recognition (Ian Allan, 2011) p. 58

Plasser and Theurer 08 Series Tamper

A good number of tampers are used by Network Rail and various contracted companies to "tamp down" or pack the ballast under the tracks to maintain a stable bed, and of course help keep the rails where they are supposed to be[1]. Plasser & Theurer make many of the tampers in service today. The 08 series being the successor to the 07 series which were used in large numbers across the UK.

Information for 08-16/4x4 C100 RT
Number built: 14
Builder: Plasser & Theurer
Power: 496 hp (390 kW)

The 08-16/4x4 C100 RT is a familiar type on British rails, the 16 in the name stands for 16 tamping tools which are arranged in 4 units of 4 tools each[2]. The C100 stands for its top speed in km/h and that it is a compact machine without a trailer. A number of other tampers are also used for switches and crossings such as the 08-4x4/4S.
Colas DR 73922 (08-16/4x4C80 RT) at Crewe

Colas DR 73908 (08-4x4/4S RT) at Derby

[1] "How is tamping performed?" <>
[2] "08-16 4x4 C100-RT" <>