Showing posts with label Metropolitan Amalgamated. Show all posts
Showing posts with label Metropolitan Amalgamated. Show all posts

Early Metropolitan Railway Electric Multiple Units (1904, 1905, 1906 Stock)

Faced with competition from electric trams (and deep-level tube trains) and a growing reluctance from passengers to travel on steam trains underground, the Metropolitan Railway began the process of electrifying its lines in the early 1900s. An experimental train was built jointly with the District Railway [1] and tested in 1900 between Earl's Court and High Street Kensington. The line used twin 600v DC conductor rails either side of the track.
Preserved 1904 Stock trailer car at LT Museum Depot, Acton



Information
Number built: 535 cars
Built: 1902-06
Builder: Metropolitan Amalgamated
Motor: Westinghouse electric motors (600v DC Fourth Rail)
Power: 600 hp (440 kW) 

Following the success of this test the Metropolitan Railway pushed ahead. A 3kV AC overhead electric system was considered, but in the end the Metropolitan decided to stick with DC conductor rails as was being adopted by London's other electric railways (and of course is used to the current day). The stock for this initial phase of electrification was built in three batches, known as the 1904, 1905 and 1906 Stock. A mixture of motor cars and trailers were built, open lattice gates used for passenger access. The initial batch of trains used Westinghouse electrical equipment though later units used more powerful British Thomson-Houston GE69 motors.

The units began operation from Uxbridge to Baker Street in 1905 [2]. The trains had first and third class seating. The open platforms proved to be troublesome in the open air parts of the line and were covered over after a short time [3]. Central sliding doors were also added in the early 1910s. One trailer has survived into preservation though is still in a poor state.
Car under test at Westinghouse track in Manchester (using AC OHLE) [4]



[1] Mike Horne, The Metropolitan Line (Capital Transport, 2003) p. 28
[2] Brian Hardy, Underground Train File Surface Stock 1933-1959 (Capital Transport, 2002) p. 4
[3] Piers Connor, The London Underground Electric Train (Crowood Press, 2015) p. 41
[4] "The Single Phase Railway System", The Electrician (July 6 1906) (Supplement Bulletin 10)

LBSCR Crystal Palace Stock / SR Class CP

The Crystal Palace Stock was built by the London, Brighton & South Coast Railway as part of it's overhead electrification of London lines. Sixty cars were built by the Metropolitan Amalgamated Carriage & Wagon Works with extra trailers and motor cars built by the railway company at their own Lancing Carriage Works. All cars had cabs which allowed the LBSCR to use a variety of formations. The stock was fitted with a bow collector.
LBSCR catenary and train at Peckham Rye, all images [1]



Information
Number built: 102 (34 3-car sets)
Built: 1911-13
Builder: Metropolitan Amalgamated Carriage & Wagon Works
LBSCR Lancing Carriage Works
Motor: 4 Winter Eichberg electric motors (6.7 kV AC OHLE)
Power: 600 hp (447 kW)
Formation: Driving Trailer Composite (DTC) + Driving Motor Brake Third
(DMBT) + DTC

After the LBSCR was absorbed into the Southern Railway in the 1920s, the SR standardised on third rail DC electric collection. The Crystal Palace Stock, now known as Class CP by the Southern, was duly converted in 1928-9.

Bow collector

Motor bogie

Cab view



[1] "Progress of Brighton railway electrification", Railway Times (May 6 1911) p. 433

Central London Railway 1903 Stock

The Central London Railway (which eventually became the London Underground's Central Line) was the first true "tube" railway in London [1]. It initially used electric locomotives hauling trailers but as soon as the railway opened in 1900 it was drawing complaints from property ownes above the line about excessive vibration, this was found to be caused by the heavy locomotives and their large unsprung weights [2]. The locomotives were replaced in 1903 by electric multiple units, known as 1903 Stock, some of which were new build and some converted from the loco-hauled trailers.
Preserved Sleet locomotive ESL 107 at LT Museum Acton

Information
Number built: 259 (88 motor cars, 99 trailers, 72 control trailers)
Built: 1900-03, 1913
Builder: Ashbury Railway Carriage & Wagon Company
Birmingham Railway Carriage & Wagon Company
Metropolitan Amalgamated Railway Carriage & Wagon Company
(later Metro-Cammell)
Brush
Engine: (Original) 2 British Thomson-Houston traction motors per motor car
(Ealing) 2 GE212 traction motors per motor car (550v DC third rail)
Power: (Original) 500 hp (372 kW)
(Ealing) 960 hp (720 kW)

The new motor cars were built by the Birmingham Railway Carriage & Wagon Company (BRCW) and Metropolitan Amalgamated Railway Carriage & Wagon Company, the original trailers having been built by the Ashbury Railway Carriage & Wagon Company and Brush. In 1908 some trailers were converted to control trailers to allow for shorter trains in the off-peak [3].

The fleet was augmented in the 1910s with the extension of the line to Ealing, extra stock was built by Brush with more powerful traction motors (the original stock was found to be underpowered when used in a lengthy formation). In the 1920s all stock was retrofitted with air-doors.

The CLR became part of London Underground in 1933 (and was renamed the Central Line soon afterwards). The 1903 Stock was replaced by Standard Stock as the CLR's central third rail system was replaced by the standard LU fourth rail.

Some 1903 Stock lived on as sleet locomotives. One of these locomotives, ESL107 has been preserved, it is the only 1903 Stock to have survived.
1903 Stock in service [5]

Interior view [5]

Another view of ESL 107


Cab of ESL 107

[1] Paul Moss, London Underground (Haynes, 2014) p. 29
[2] J. Graeme Bruce & Desmond Croome, The Twopenny Tube (Capital Transport, 1996) p. 15
[3] Brian Hardy, Underground Train File Tube Stock 1933-1959 (Capital Transport, 2001) p. 5
[4] John Glover, London Underground Rolling Stock in Colour (Ian Allan, 2009) p. 31
[5] "Fireproof cars on the Central London", Street Railway Journal Vol. XXII No. 9 (Nov 7 1903) p. 851

Metropolitan Railway BTH Locomotives

Following on a year after the first batch of locomotives for the Metropolitan Railway, were these locomotives which used British Thomson-Houston electrical equipment and General Electric motors. Unlike the earlier locomotives which had a central cab, these locomotives had a cab at each end. In 1919 the BTH equipment was replaced by Westinghouse.
No. 11 [1]


Information
Number built: 10
Built: 1907
Builder: Metropolitan Amalgamated / British Thomson-Houston
Motor: 4 GE69 electric motors (600v DC third rail)
Power: 800 hp (567 kW)
Formation: Bo-Bo

In the 1920s the Metropolitan Railway decided to have it's electric locomotives rebuilt by Metropolitan Vickers though this was quickly changed into an order for twenty new locomotives, which reused equipment from the earlier two batches. The BTH locomotives were withdrawn in the early 1920s.
Another view of No. 11 [1]

Inside showing the electric equipment, notice no cab partition [1]

Cab controls [1]



[1] "Metropolitan Railway locomotives for passenger and goods service", Railway Times (Aug 17 1907) p. 173

Metropolitan Railway "Camel-Back" Locomotives

The Metropolitan Railway in London began electrification of it's lines in the early years of the twentieth century. As well as electric multiple units, they also ordered a fleet of electric locomotives, the first ten being built by Metropolitan Amalgamated and used British Westinghouse equipment. The locomotives were built to haul passenger trains between Baker Street and Harrow-on-the-Hill [1][2], Great Western Railway trains from Edgware Road and Aldgate [3] and freight trains.

No. 1, notice the Baker Street destination board [1]


Information
Number built: 10
Built: 1906
Builder: Metropolitan Amalgamated / British Westinghouse
Motor: 4 Westinghouse 86 electric motors (600v DC fourth rail)
Power: 860 hp (640 kW)
Wheel arrangement: Bo-Bo

Unlike later locomotives bought by the Metropolitan Railway, this first batch had a central cab. This earned them the name "Camel-Backs". They were built with just one controller which proved to be operationally difficult for the driver, a second controller was added later. The locomotives were built as small as possible due to the cramped conditions at the termini. They used smaller electric motors than usual for the power output and employed forced ventilation from a fan installed in the cab [4]. The locomotives were fitted with improved electrical equipment in 1911. 

These locomotives, and the second batch of locomotives with British Thomson-Houston equipment, were replaced by new build locomotives by Metropolitan-Vickers in 1922 [5], originally the plan had been to rebuild the original locomotives but this proved to be uneconomic after one prototype so new locomotives were built instead reusing some electrical equipment from the earlier locomotives.
Plan of the locomotive [1]

Another view of No. 1 [3]

[1] "New Metropolitan Electric Locomotives", Street Railway Journal (Vol. XXVI No. 9) August 26 1905, p. 313 
[2] Chris Buck & Peter Lamb, The London Underground and it's Electrification, p. 5
[3] C.I. Horsey, "The Twenty Metropolitan-Vickers Locomotives One Hundred Years On - An Appendix to Their Story", Underground News (November 2019) p. 651
[4] "Electric Locomotives on the Metropolitan Railway", The Electrician (June 1 1906) p. 250
[5] Piers Connor, The London Underground Electric Train (Crowood Press, 2015) p. 43

London Underground Sleet Locomotives

The Central London Railway initially used electric locomotives hauling trailers but these were found to be causing problems with their large unsprung weights [1]. The locomotives were replaced in 1903 by electric multiple units, known as 1903 Stock. These in turn were replaced by Standard Stock in the 1930s, a number of 1903 Stock motor cars were then converted into Sleet locomotives to clear snow and ice from the track in 1939.
ESL 107 at LT Museum Acton



Information
Number built: 18
Built: (Original tube stock) 1900-03, 1913
Sleet Locomotives converted 1939
Builder: Birmingham Railway Carriage & Wagon Company
Metropolitan Amalgamated Railway Carriage & Wagon Company
Engine: GE66 traction motors (630v DC fourth rail)
Power: 960 hp (720 kW)

These were built by taking two driving ends to make a single locomotive [2]. Most sleet locomotives survived in service until the mid-1980s though as tube stock began to have its own de-icing equipment fitted their role reduced over the years, but they could also be used to clear leaves from the line. One locomotive ESL107 has been preserved, it is the only 1903 Stock to have survived.
Sleet locomotive ESL 107

Cab of ESL 107

1] J. Graeme Bruce & Desmond Croome, The Twopenny Tube (Capital Transport, 1996) p. 15
[2] John Glover, London Underground Rolling Stock in Colour (Ian Allan, 2009) p. 31