Showing posts with label English Electric. Show all posts
Showing posts with label English Electric. Show all posts

Class 50 (English Electric 2,700hp Type 4 Diesel-Electric)

The Class 50 was built in the late 1960s, and initially hired by British Rail from English Electric, to power the remaining non-electrified portions of the West Coast Main Line from Crewe to Scotland [1] on passenger trains and freight. The Class 50, a development of the English Electric DP2 prototype, often worked these WCML trains in pairs (though they could also work in multiples of three) to provide sufficient performance to match the timings of the electric locomotives that they shared their trains with. The locomotives were bought outright by BR in 1973 but by the mid-1970s were being displaced from the WCML due to the completion of electrification and the arrival of the Class 87. The Class 50s were sent to Western Region to work in the south and south west of England.

GB Railfreight liveried 50 049 at Kidderminster Town




Information
Number built: 50
Built: 1967-68
Builder: English Electric, Vulcan Foundry
Motor: English Electric 16CSVT diesel
Power: 2, 700 hp (2, 013 kW)
Wheel arrangement: Co-Co

At first the reliability of the Class 50 was poor with failures often due to problems with the then-novel electronic systems fitted. Crews joked that they were called the Class 50 as there was only a 50:50 chance that they would make it to their destinations! [2] The Class 50 received a full refurbishment in the late 1970s/early 1980s to improve reliability by removing little used and redundant equipment such as the slow speed control.

Much of the locomotives' time was spent on west of England express passenger trains out of London Paddington and London Waterloo and other passenger services. This made them vulnerable as multiple units became the favoured mode of people mover in the late 1980s and early 1990s and the supply of work dried up. There were attempts to utilise the class for slower freights and one locomotive was modified with lower geared bogies though the experiment was not a success.

The Class 50 was withdrawn from BR service by 1994, though no less than eighteen have been preserved (thirty six percent of the fleet) and several are mainline certified. The Class 50s were the first class of diesel locomotive to only carry BR blue livery (and later variations) though one preserved locomotive has been given a "what might have been" BR green livery. One British Rail exception came in the 1980s when one Class 50 was renamed Sir Edward Elgar and repainted in Brunswick Green to commemorate the 150th anniversary of the GWR.

Also in GBRf livery, 50 007 at Bewdley

Network South East livery is carried by 50 026 at Kidderminster Town

50 049 when it carried BR large logo livery

50 007 approaches Highley

50 034 at Kidderminster Town



[1] Brian Haresnape, Production Diesel-Electrics Types 4 and 5 (Ian Allan, 1984) p. 67
[2] Michael Welch, Diesels on the Western (Capital Transport, 2013) p. 107

Class 487 Waterloo & City Stock

The Class 487 electric multiple unit spent the entirely of it's revenue earning service running underground. They were operated on the Waterloo & City Line, which nowadays is part of London Underground but originally was a separate line to the majority of London's subterranean railways and owned by a succession of mainline railway companies until nationalisation and British Rail. In 1994 the line was transferred to London Underground to become an Underground line proper.

At LT Museum Acton in restored NSE livery

Information
Number built: 28 cars (12 DMBSO driving cars and 16 TSO trailers)
Built: 1940
Builder: English Electric Dick Kerr works
Engine: 2 English Electric EE500 traction motors (660v DC third rail)
Power: 380 hp (283 kW) per driving car
Formation: (Variable) Driving Motor Brake Standard Open (DMBSO)+
Trailer Standard Open (TSO)+DMBSO

Designed by O.V.S. Bulleid, the Class 487s (originally TOPS classified Class 453) were built for the Southern Railway during World War 2 and entered service from 1940 [1]. The units consisted of driving motor cars (with cabs at both ends - and hence could operate singly) and trailers. In off-peak periods the Waterloo & City Line trains often ran with just a pair of motor cars until the 1960s when this was thought to be unsafe due to the excess of power [2]). In peak times up to three trailers could be marshalled between two motor cars.

The Class 487 remained in service until being replaced by the Class 482 in 1993 seeing out it's final days in Network South East livery. Before that, the units wore Southern Railway green and BR Blue (though uniquely without yellow ends) [3]. The Class 487s operated on 660v DC third rail and spent all of it's working life on the short underground line though the units did see sunlight now and then when they needed heavy maintenance and had to be bought up to the surface. For test purposes to develop a new speedometer, one driving car was operated above ground in the late 1970s for a short period [4]. As it did not have windscreen wipers the tests had to be curtailed immediately if it rained!

One DMBSO has been saved from the scrap man and has being restored at the London Transport Museum to its final Network South East livery.

Interior

Cab view
Restored condition
A photo taken in May 2015 during the restoration

The preserved car in under coat, what a difference a livery makes!

[1] Colin J Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 370
[2] Colin J Marsden & Christopher G Perkins (ed.) "The Waterloo & City Line", Modern Locomotives Illustrated Annual No. 2 (RailwayCentre, 2010) p.82
[3] John Glover, London Underground Rolling Stock in Colour (Ian Allan, 2009) p. 31
[4] Marsden, DMU p. 371

English Electric NZR E Class

The E Class battery electric locomotive was ordered by New Zealand Railways to accompany the five EO class locomotives built for the Otira to Arthurs Pass section of the Midland Line. The locomotive was intended for engineering and maintenance work on the line (when the juice would most likely be turned off). The locomotive had a four wheeled battery tender.

E Class locomotive [1]



Information
Number built: 1
Built: 1922
Builder: English Electric
Motor: 4 DK30 traction motors (battery electric)
Power: 176 hp (131 kW) 
Wheel arrangement: Bo-Bo-2 (including battery tender)

The locomotive unfortunately did not last very long, it was withdrawn from service in 1930 and written off due to problems maintaining the batteries. The locomotive was scrapped though parts of the locomotive were reused elsewhere including the battery tender as a general purpose wagon.

E Class locomotive, notice the battery tender [2]



[1] English Electric Journal (1924 Vol 4) p. 278
[2] "Midland Railway of New Zealand", English Electric Journal (1923 Vol 4) p. 171

English Electric Battery Electric Locomotive for Ribble Power Station

Ribble Power Station near Preston began operating in 1924 and operated until 1976. It was a coal powered station and therefore needed a lot of coal bought in, which came in largely by boat. A railway line handled wagons of coal and spent ash, as is usual with coal powered stations using steam traction was considered dangerous due to sparks which could ignite the coal. Many stations used fireless steam locomotives but in the case of Ribble English Electric built this battery electric locomotive.

Information
Number built: 1
Built: 1924
Builder: English Electric
Wheel arrangement: 4wBE

The locomotive [1]



[1] "Electricity supply developments in Preston", English Electric Journal (October 1925) p. 115

KTMB Class 20

These diesel locomotives were built by English Electric for the Malaysian Railways (Keretapi Tanah Melayu Berhad) in 1957. They were the first main line diesel locomotives to be introduced in Malaysia. They were used for the main passenger express services but also could be used on some freights. They had a bonnet nose like other English Electric diesel locomotives such as the Classes 37 and 40 though had the same engine which was fitted to re-engined Class 31s! The locomotives were built for metre gauge.

A Class 20 on delivery (right), with it is another EE built loco, a class 15 shunter [1]


Information
Number built: 26
Built: 1957
Builder: English Electric Vulcan Foundry
Motor: English Electric 12SVT diesel
Power: 1, 500 hp (1, 119 kW) 
Wheel arrangement: Co-Co

The locomotives were withdrawn from services in the late 1980s. One has been preserved.


[1] "Export orders", Board of Trade Journal Vol. 199 Issue 3831 (19 August 1970) p. 416

English Electric / Cravens Motor Cars for the La Guaira and Caracas Railway

The La Guaira and Caracas Railway was a narrow gauge (914mm gauge) line that linked Caracas to the port of La Guira. The line was electrified in the 1920s and used a combination of Swiss built locomotives and British built passenger motor cars. The latter were built by Cravens with electrical equipment by English Electric. The motor cars could carry passengers and also haul other carriages.

One of the motor cars [1]


Information
Number built: 4
Built: 1927
Builder: Cravens / English Electric
Motor: 4 DK109 traction motors (1500v DC OHLE)
Power: 264 hp (197 kW) 
Wheel arrangement: Bo-Bo

The motor cars served into the 1940s but the line suffered from competition with road transport, and was a different gauge to other railways in Venezuela, after a period of financial difficulty it was nationalised. After storm damage in 1951 the railway was not repaired due to a lack of government finance and closed. The motor cars managed to survive stored at Caracas until the end of the 1950s but were scrapped. Little trace of the railway now remains.

[1] "Electrification of the La Guaira and Caracas Railway", English Electric Journal (4/1928) p. 74

English Electric Battery Locomotives for the Rhodesia and General Asbestos Corporation

English Electric built hundreds of electric and battery electric locomotives for industrial and commercial customers. These two locomotives were built for the Rhodesia & General Asbestos Corporation for work at it's Shobani mine. The locomotives worked in tropical conditions at altitude both above and below ground.

The two locomotives [1]
Information
Number built: 2
Built: 1928
Builder: English Electric
Motor: 2 DK51F electric motors
Power: 15 hp (11.2 kW) 
Wheel arrangement: 4wBE

The locomotives could maintain maximum power for an hour with their 95v batteries. The locomotives were not very powerful perhaps though they were pretty small (though weighed four and a half tons), they operated on a 1 foot 6 inch gauge (457mm minimum gauge) railway.

[1] "A recent industrial locomotive installation", English Electric Journal Vol. 4 Issue 2 (1928) p. 60

Southend-on-Sea Corporation Tramways

Southend-on-Sea's first tramway was a horse drawn tram that ran along the pier (this was later replaced by a dedicated railway which has used a variety of rolling stock over the years). An electric tram for the town itself began operation in 1901 which used 1, 067mm gauge like the pier railway did at the time. The initial trams for the corporation were built by Brush Traction in a variety of types, some double decker and other single decker and four or eight wheels.

English Electric tram [1]



Information for original Brush cars
Number built: 14
Built: 1901
Builder: Brush Traction

More trams were built by G.F. Milnes, Brush and the United Electric Car Company in subsequent years. The network continued to expand in the 1910s and at it's greatest extent was nearly fifteen kilometres long. The final trams built for the corporation were by English Electric in 1923. Earlier trams with open top decks were refurbished to add top covers.

By the mid-1920s the corporation was already looking at replacing the tram with electric trolleybuses. Replacement began as lines required track renewal. The final trams ran in 1942.

[1] English Electric Journal Vol 3 Issue 6 (1926) p. 248

JNR Class 1040 / ED50 / ED17 / ED18

In the early 1920s the Imperial Government Railways of Japan began electrification of the Tokaido and Yokosuka Lines. The railway imported electric locomotives from the UK, US and Switzerland to provide the motive power and also to give the Japanese experience with the locomotive type before they pursued their own designs. By far the largest class of locomotives to be built was the seventeen strong Class 1040 which were constructed by English Electric and North British Locomotive Company (two examples of the earlier and similar Class 1030 were also built). The locomotives arrived in Japan between 1924 and 1925 and were put into use hauling passenger trains, the locomotives were built for 1, 067mm gauge. After 1928 they were classified as the ED50.
Class 1040 [1]



Information
Number built: 17
Built: 1923
Builder: English Electric / North British Locomotive
Motor: 4 DK86 electric motors (1500v DC OHLE)
Power: 1, 200 hp (865 kW) 
Wheel arrangement: B-B

Between 1930 and 1931 the locomotives were rebuilt as the ED17, they were regeared for their new role hauling mostly freight traffic along the Chuo Line. Two locomotives (classified as ED18) were later modified with A1A-A1A bogies to reduce the axle load on the Iida Line which was more lightly built than other lines. Most of the ED17 fleet survived the war and continued to be used on the Chuo Line but were gradually replaced by more modern types by in mid-1960s. The final ED17s and ED18s were retired from service in 1972. One ED17 has been preserved.
Another view of a Class 1040 locomotive [1]




[1] "Electric locomotives of the Imperial Government Railways of Japan", English Electric Journal Vol. 2 Issue 6 (1924) p. 294

Huddersfield Corporation Tramways

Huddersfield Corporation Tramways operated between 1883 and 1940 to 1,416mm gauge. The trams were initially horse and steam powered but electric trams began operating from 1901. The first trams built for the corporation were twenty five double bogie double deckers built by G.F. Milnes. These had open top decks initially.
English Electric built 121 [1]



Information for original tramcars
Number built: 25
Built: 1900
Builder: G.F. Milnes

A second batch of thirty six tramcars built by the British Electric Car Company were built as the electrified network expanded. These tramcars were single bogie cars though were also double deckers. More trams were built in the following decades by the United Electric Car Company which later became part of English Electric. The corporation also operated a couple of dedicated coal trams.

Despite much of the tram fleet still being fairly young the corporation began converting over to trolleybuses in the early 1930s. The trams ran for the final time in June 1940. All trams were scrapped.

[1] English Electric Journal 1923-04 Vol 2 Issue 4 p. 175

Class 86 (BR Doncaster / English Electric AL6)

The Class 86 AL6 was the production class of AC electrics built for the West Coast Main Line following on from the pilot-scheme AL1-5 (Classes 81 to 85). The AL6 took advantage of experience gained from the earlier locomotives including the fitting of only one pantograph and with changes to equipment. The AL6 is very similar to the Class 85 AL5 technically except for the stub nose cab ends.

Freightliner 86 622 at Crewe Heritage Centre



Information
Number built: 100
Built: 1965-66
Builder: BR Doncaster / English Electric
Engine: 4 AEI 282AZ or GEC G412AZ (86/1) traction motors (25kV AC OHLE) 
Power: (86/0) 5, 900 hp (4, 400 kW) max output
Wheel arrangement: Bo-Bo

The AL6 was designed for mixed traffic including travelling at up to 100mp/h on West Coast Main Line expresses. Unfortunately this caused some problems with the original axle-hung traction motors, with troublesome riding qualities and damage caused to the track and to bogies. Following research at BR Derby, a "flexicoil" suspension system was adopted for fifty eight of the class which were designated Class 86/2 [1]. Another early sub-class was the 86/1, a trio rebuilt to help develop the follow-on Class 87 and able to reach 110mp/h [2][3].

A later sub-class was the 86/3 which were fitted with SAB resilient wheels for improved high speed running and reducing track wear, and with equipment for multiple-working. The Class 86/4 were fitted with flexicoil suspension and SAB wheels for mixed-traffic duties. The 86/5 was a trial locomotive to test ways of improving performance on heavy freights. The 86/6 were a sub-class used on Freightliner trains, finally the 86/9s were a couple of locomotives used as load banks by Network Rail.

Despite their advancing years the Class 86 can still be seen on the network, they have recently been withdrawn from hauling Freightliner trains though can appear on some passenger charters (86 259 as shown below has been returned to it's original Electric Blue livery [4]). Some have also been exported to Eastern Europe.

86 259 at Tyseley

Freightliner 86 639 and friend head through Stafford

Also heading through Stafford is 86 259

Most Freightliner 86 hauled duties uses pairs of locomotives

Another Freightliner 86 pair head through Rugeley Trent Valley



[1] Brian Haresnape, Electric Locomotives (Ian Allan, 1983) p. 64
[2] Gavin Morrison, AC Electric Locomotives in Colour (Ian Allan, 2013) p. 25
[3] Pip Dunn, British Rail Main Line Locomotives Specification Guide (Crowood Press, 2013) p. 161
[4] David Lawrence, British Rail Designed 1948-97 (Ian Allan, 2016) p. 155

English Electric NZR EO Class

The EO class was built by English English for New Zealand Railways for use on the Otira to Arthurs Pass section of the 1,067mm gauge Midland Line. This included an 8.5km long tunnel section and was too long and steep for the use of steam locomotives due to ventilation reasons (the NER ES1 class was built for a similar reason in the UK).
Locomotive with both pantographs raised [1]


Information
Number built: 5
Built: 1922
Builder: English Electric (Dick Kerr)
Motor: 4 English Electric traction motors (1500v DC OHLE)
Power: 680 hp (510 kW)
Wheel arrangement: Bo-Bo

The five locomotives worked well in service, often working trains in trios (they could work in multiple). Due to this the locomotives were later modified to just have the one cab at one end. They remained in service until 1968, one has been preserved.
Hauling a train [1]

Emerging from the tunnel [1]



[1] "Railway electrification in New Zealand", The Electrical Review (March 13 1925) p. 419

Ghana Railways 1851 Class

These locomotives were built by English Electric / AEI Traction for Ghana Railways. The locomotives were very similar to the British Rail Class 37 though had hood type cabs. These locomotives formed the mainstay of the Ghana Railways locomotive fleet for many years.
Being delivered [1]



Information
Number built: 16
Built: 1969-70
Builder: English Electric / AEI Traction
Motor: EE 12CSVT Mk II diesel
Power: 1, 850 hp (1, 380 kW) 
Wheel arrangement: Co-Co

However, by 1999 only two remained in service. The last survived in storage between 2003 and 2007 before it was finally scrapped.

[1] Board of Trade Journal, December 1969 p. 1734

Class 73/9 Rebuilds

The Class 73 Electro-diesel was for a long time a unique specimen on Britain's railways, being able to operate using electric or it's own diesel generators (bi-modes as they are now termed are more common now). While the Class 73 remains in service with various operators in the early 2010s there were two separate re-engineering efforts to rebuild locomotives and greatly increase the diesel power (the original Class 73s only had a 600hp diesel).
Cummins powered 73 952 at Kidderminster Town



Information
Number built: 13 (Rebuilds)
Built: (Original) 1962-67
(Rebuilds) 2013-4
Builder: (Original) BR Eastleigh / English Electric
(Rebuilds) Brush Traction or Rail Vehicle Engineering Limited
Motor: MTU 8V 4000 R43L diesel or
2 Cummins QSK19 diesels / 750v DC third rail
Power: 1, 600 hp (1, 193 kW) (MTU)
1, 500 hp (1, 119 kW) (Cummins)
1, 420 hp (1, 059 kW) Electric
Wheel arrangement: Bo-Bo

Although the two types of re-engineered locomotives have quite different equipment they are all termed Class 73/9 although at one time it was considered to renumber them Class 75 (this would have cost more in administration and re-certification). In both cases the work included replacing the original EE diesel with a much more powerful motor and replacing worn electrical and mechanical components.

Thirteen have been re-engineered to date in two phases. The "Phase 2" Class 73s with MTU diesels have had their third rail equipment removed. As virtually "new" locomotives they will likely serve with Network Rail, GB Railfreight and Caledonian Sleeper for a long time to come (they are expected to last at least twenty-five years). Two were converted by RVEL with two Cummins diesel, these are used by Network Rail. The other eleven are MTU powered.
MTU powered 73 964 at Tonbridge

73 952 cab

73 952 at Kidderminster Town

73 963 and friend at Derby

73 951 and a test train at Derby


Class 73 (BR Eastleigh / English Electric 1,420/600hp Electro-Diesel)

Despite the fact that diesel locomotives often spend a fair amount of time operating along electrified routes it is unusual that British Rail only ever built two classes of electro-diesel locomotives (these days better known as bi-mode) which could operate both as electric or diesel locomotives, the Class 73 and Class 74. Both were operated by BR's Southern Region, the Class 73 is the only survivor [1]. A number have been rebuilt and upgraded in the last few years (Class 73/9) so they look set to remain in service for a long time to come. these will be covered separately.
GB Railfreight 73 128 leads a class mate through Tonbridge




Information
Number built: 49
Built: 1962, 1965-67
Builder: BR Eastleigh / English Electric
Motor: English Electric 4SRKT Mk II diesel
EE542A or EE546/1B traction motors (750v DC third-rail)
Power: 1, 420 hp (1, 059 kW) - Electric
600hp (447kW) - Diesel
Wheel arrangement: Bo-Bo

The Class 73 is an electric locomotive designed to work with SR's 660-750v DC third-rail system. It also has a small diesel engine for operating on non-electrified lines or if the power is off. They are highly versatile locomotives that served on a whole range of traffic in Southern England, being true mixed traffic locomotives they could be found on passenger and freight services. 

Their numbers however were reduced in the privatisation era but only ten have been scrapped to date. Twelve have been preserved with the rest still operating on the network most usually employed hauling engineering trains.

Sub-class Details
73/0 Original prototype batch, originally to have been called the Class 72
73/1 Main production batch, higher power output and speed
73/2 Modified for Gatwick Express push-pull duties
(coupled to the Class 488 and 489)
73/9 Re-engineered and upgraded examples

They are currently operated by GB Railfreight, Network Rail, South Western Railway and Southern. 
GB Railfreight 73 136 is led through Kidderminster

73 140 preserved in NSE livery seen at Eridge

73 136 at Kidderminster Town

Another view of 73 140

73 210 preserved in Intercity livery at Wirksworth



[1] Colin J. Marsden, Traction Recognition (2nd Edition) (Ian Allan, 2008) p. 82

Class 23 (English Electric 1,100hp Type B(2) Diesel-Electric) "Baby Deltic"

The success of the revolutionary Deltic diesel engine and the Deltic prototype saw British Railways explore the possibility of putting a single cut-down version of the engine into a smaller mixed-traffic locomotive in the Type B (later Type 2) power classification. The Class 23 "Baby Deltic" was hence born for services on the Great Northern network [1]. With hindsight the experiment and resulting small fleet of Type 2 locomotives was an unnecessary mistake. There was found to be no real advantage over similar sized locomotives with traditional diesel engines but the Deltic engine also bought with it extra complexity and cost [2]. The Baby Deltics owed little to their larger brethren except for the engine technology and in design and cab terms owed a lot to the Class 40.
Baby Deltic replica under construction at Barrow Hill



Information
Number built: 10
Built: 1959
Builder: English Electric
Engine: Napier T9-29 Deltic diesel
Power: 1, 100 hp (820 kW)
Formation: Bo-Bo

The fleet was refurbished in 1963 and modernised with a 4 character headcode replacing the original headcode discs and gangway doors [3]. They continued to serve British Railways though had high maintenance costs, and passengers and crews found they had excessive noise and fumes in operation. With these disadvantages, and being such a tiny fleet, there was no way the Baby Deltics could survive the fleet rationalisation at the end of the 1960s and all were withdrawn from normal service by 1971. 

One survived with the Railway Technical Centre and hauled test trains until 1975 [4] but was scrapped like the rest of the class. No Baby Deltics now exist though the Baby Deltic Project is building a replica using a Class 37, a surviving T9-29 engine and Class 20 bogies. Work is ongoing at Barrow Hill.
D5901 at Doncaster in 1959 (KD collection)

Another view of the replica



[1] John Vaughan, Diesels on the Eastern (Ian Allan, 1982) p. 31
[2] Brian Haresnape, Early Prototype and Pilot Scheme Diesel-Electrics (Ian Allan, 1981) p. 72
[3] Haresnape p. 75
[4] Colin J. Marsden, 25 Years of Railway Research (OPC, 1989) p. 67

Class 97

Class 97 is the designation of locomotives used by British Rail (and it's successors) for departmental and special duties. Most locomotives which have been used for this purpose have been former revenue earning locomotives though some have been especially built. The only Class 97s currently in service are four Class 37s which were converted to test ERTMS radio signalling equipment. They are currently used mainly on the Cambrian Line from Shrewsbury to Aberystwyth which uses ERTMS.
97 303 at Derby


Information for 97/3
Number built: 4
Built: 1960-65 
Builder: English Electric (Modifed by Network Rail)
Motor: English Electric 12CSVT diesel
Power: 1, 750 hp (1, 305 kW)
Wheel arrangement: Co-Co

Other locomotives which have carried 97 XXX numbers include a quartet of Class 31s which were used to haul test trains for the Railway Technical Centre, one has been preserved and currently carries RTC livery. Class 25s, Class 45s and Class 46s were among the diesel classes also been used by BR for test purposes. One of the latter was 97 401 (46 009) which famously was destroyed by deliberately driving it into an empty nuclear flash to prove the integrity of the latter!

Class 97/6 were five 165 series shunters built by Ruston & Hornsby for departmental duties [1], unlike the mainline locomotives mentioned above, these were purpose built for departmental use. Numerous other shunters have also been transferred to the Class 97 fleet.
Former 97 654 now preserved at Peak Rail

Former 97 403 Ixion at Rowsley South

Side view of 97 303

97 205 at Princes Risborough

97 303 pulls away with a test train



[1] Colin J Marsden, Departmental Stock (Ian Allan, 1984) p. 108