Class 332 Heathrow Express

The Class 332 EMUs are used exclusively on the Heathrow Express out of London Paddington. The trains leave for the airport every fifteen minutes on a non-stop journey which takes fifteen minutes. Similar units known as the Class 333 operate in the North of England.

Information
Number built: 61 (14 4 and 5 car sets)
Built: 1997-98, 2002
Builder: CAF Siemens
Engine: 4 Siemens traction motors (25kV AC OHLE)
Power: 1, 877 hp (1, 400 kW)
Formation: Driving Motor First Open (DMFO)+Trailer Standard Open (TSO)
+Pantograph Trailer Standard Open Kavatory (PTSOL)+
Driving Motor Standard Open (DMSO) or
DMSO+TSO+PTSOL+Driving Motor First Lavatory Open (DMFLO)
(5 car sets have an extra TSO)

The EMUs were originally delivered as three-car sets but have been reformed as four and five car sets with further car deliveries. There are nine four-car sets and five five-car sets [1]. They were the first electric trains to operate on the Great Western Main Line after a portion was electrified as far as the airport junction.
332 012 passes through Ealing Broadway heading for Paddington

332 001 up on jacks at the Heathrow Express depot at Old Oak Common

Interior of 332 003

Another view inside Old Oak Common depot

Cab of 332 003

332 006 waits to depart at London Paddington

[1] Colin J. Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 266

London Underground R Stock

The R Stock was built for the Circle and District Lines to replace life-expired hand operated door stock. The stock was a mixture of new build and converted Q38 Stock. They served until being replaced by D78 Stock in the early 1980s.

Information
Number built: 378 (including conversions)
Built: 1949-59 (3 production batches)
Builder: Gloucester Railway Carriage & Wagon Company, Metro-Cammell,
Birmingham Railway Carriage & Wagon Company
Engine: British Thomson-Houston traction equipment (630v DC fourth rail)
Formation: Driving Motor (DM)+Non Driving Motor (NDM)+NDM+NDM
or NDM+DM

The first batch of R Stock was the R47 Stock which was built by the Birmingham and Gloucester Railway Carriage & Wagon Companies, they were joined by converted (by GRWC) Q Stock trailers known as R38/1. The second batch was built by Metro-Cammell as the R49 Stock. The earlier R Stock was built from steel but R49 was built from aluminium alloy [1]. As the aluminium was corrosion resistant they were also left unpainted. This combined with the alloy to make R49 cars 16% lighter than R47s [2] - giving a 12% saving in energy [3]. There was also a third and final batch of trains (also by Metro-Cammell) known as the R59 Stock.

Externally the R Stock was similar to the earlier Q Stock with a flare to the bottom of the car sides. Stock was semi-permanently coupled in 4-car and 2-car sets which could be combined to form 6 or 8 car trains. Later on all train formations were modified with some 4-car sets reduced to 3 cars and some increased to 5.

Some R Stock was withdrawn due to being surplus in the early 1970s but the rest survived until the early 1980s with the final withdrawal in March 1983. Three cars have been preserved.
Preserved DM 22679 at LTM Acton

Cab of 22679

Aboard 22679

[1] Paul Moss, London Underground (Haynes, 2014) p. 110
[2] Brian Hardy, Underground Train File Surface Stock 1933-1959 (Capital Transport, 2002) p. 78
[3] Piers Connor, The London Underground Electric Train (Crowood Press, 2015) p. 139

Ruston & Hornsby 165 series (including Class D1/3 and Class 97/6)

Ruston & Hornsby built hundreds of small industrial shunters between 1947 and the mid-1960s [1], they were known as the 165 series and had diesel-mechanical and diesel-electric transmission versions and also versions with both 0-4-0 and 0-6-0 wheel arrangements.

Although most went to industrial users two 165DS 0-4-0 shunters were sold to British Railways as the Class DY1, later renamed D1/3 [2]. Incidentally the prototype of this type of shunter was loaned to the LNER for a short period just before nationalisation for testing and evaluation though nothing more came of this at the time. The two D1/3s worked in the Stratford area until withdrawal in the late 1960s. One was preserved along with a good number of ex-industrial 165s which are a common sight on preserved railways.

Information for Class D1/3
Number built: 2
Built: 1956
Builder: Ruston & Hornsby
Engine: Ruston 6VPHL diesel
Power: 165 hp (123 kW)
Wheel arrangement: 0-4-0

Five 0-6-0 165DE shunters were also bought for departmental service by BR Western Region's civil engineering department, the first arriving in 1952 and the rest 1959 [3]. These were known as the Class 97/6 [4] and served until the late 1980s and early 90s at locations like Radyr, Taunton, Reading and Swindon [5] mainly shunting long welded rail trains [6]. Three of these locomotives have been preserved.
Former 97/6 PWM654 preserved at the Heritage Shunters Trust, Rowsley South

D2961 at Bridgnorth, SVR

Former BIP Chemicals shunter 31920 (165DM) seen at Highley, SVR

GEC 424841 165DE Roman at Foxfield Railway

Another view of PWM654

[1] Ray Hooley, Engine Production Years <http://www.oldengine.org/members/ruston/Production5.htm>
[2] Brian Haresnape, Diesel Shunters (Ian Allan, 1984) p. 52
[3] Paul Smith & Shirley Smith, British Rail Departmental Locomotives 1948-1968 (Ian Allan, 2014) p. 19
[4] Haresnape, Shunters p. 79
[5] Colin J. Marsden, Departmental Stock (Ian Allan, 1984) p. 108
[6] Heritage Shunters Trust Stock List (2016) p. 12

Class 05 (Hunslet Engine Co. 204hp Diesel-Mechanical)

The Class 05 was yet another type of small shunter built for British Railways in the late 1950s (the Class 05 designation was shared with the Andrew Barclay DJ14 class of 0-6-0DM shunter [1]). This Class 05 (also known as the DJ13, D2/8, 2/15A, D2/9 and 2/15 at various times) was built in two distinct batches, the second batch being somewhat larger with deeper bufferbeams and larger cab windows [2].

However all were withdrawn in 1966-68 along with hundreds of other surplus to requirements shunters except a couple which went into departmental service.

Information
Number built: 120
Built: 1955-61
Builder: Hunslet Engine Co.
Engine: Gardner CLP 8L3 diesel
Power: 204 hp (152 kW)
Wheel arrangement: 0-6-0

One of these was sent to the Isle of Wight to run engineering trains on the newly electrified Island Line. It arrived in 1966 and became the last survivor of the class on BR metals (and indeed any Hunslet loco) serving until 1984 and gaining TOPS numbers. It was replaced by a Class 03 following gearbox problems - though has been preserved by the Isle of Wight Steam Railway [3]. Four Class 05s in total have been preserved [4].
Two views of D2587 preserved at the Heritage Shunters Trust, Rowsley South


[1] Brian Haresnape, Diesel Shunters (Ian Allan, 1984) p. 50
[2] Haresnape p. 48
[3] R.J. Maycock & R. Silsbury, The Isle of Wight Railways from 1923 Onwards (Oakwood Press, 2006) p. 256
[4] Heritage Shunters Trust Stock List p. 8

Waterloo and City Railway Stock

The Waterloo & City Railway was built to connect the LSWR terminus at Waterloo with the City of London. Due to land restrictions the railway had to be built as a deep level tunnel and thus required electric railway stock.

Information
Number built: 31
Built: 1897-1921
Builder: Jackson & Sharp / Eastleigh Works
(later) English Electric
Engine: 2 Siemens traction motors per power car (530-600v DC third rail)
(later DMs) 2 English Electric 15L traction motors
Power: 120 hp (89 kW)
Formation: Driving Motor (DM)+Trailer (T)+T+DM (peak hours)

The rolling stock was built in kit form by the Jackson & Sharp Company in the US and then shipped over to be assembled at the LSWR Eastleigh Works. Once assembled the cars were then lowered down to the new railway via a lift as there was no (and never has been) connection between the Waterloo & City line and the rest of the railway network. Testing along the line took place in June 1898 with public service beginning just two months later! The cars were built as open saloons with wooden seating, there were separate compartments on later stock for smokers and non-smokers.

The initial batch of vehicles was for twenty-two, half Driving Motors and half Trailers. In peak hours four car formations were used though smaller formations could be used when it was quieter. One problem the Waterloo & City suffered from more than most railways (and still does to this day) was the huge difference between peak and off-peak demand. To cater for the latter five extra Driving Motors with cabs at both end were built at the Dick Kerr factory (later English Electric) for use in quieter periods [3][4]. A final batch of five extra trailers were built at Eastleigh in 1921 to enable the peak time trains to be increased in length.

The Waterloo & City Railway became part of Southern Railway in 1923. In the 1930s the railway held a review of the line and decided to build new stock to replace the original stock which was now approaching forty years old and rather obsolete. They had been built as gate stock with end doors which had to be manually opened and closed and not sliding doors. They required a lot more staff to be present and took longer to load and unload as a consequence. The original stock was withdrawn from service in 1940 [5] being replaced by what became the Class 487.
Double ended car built by Dick, Kerr. Public domain image [1]

Interior, public domain image [1]

On the surface after delivery, public domain image [2]

[1] "Some new English rolling stock", Street Railway Review Vol. X No. 6 (June 1900) p. 350
[2] "Dick, Kerr Co. " (Advertisement), Street Railway Journal (October 1901) p. 39
[3] Street Railway Review p. 350
[4] John C. Gillham, The Waterloo & City Railway (Oakwood Press, 2001) p. 177
[5] Colin J. Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 178

Class 71 (BR Doncaster / English Electric 2,552hp DC Electric Type HA)

The Class 71 DC electric locomotive was built for the expansion of the Southern Region third-rail DC network into Kent. They were designed with an emphasis on a good power/weight ratio [1] with inspiration taken from best practice on the continent.

Information
Number built: 24
Built: 1958-60
Builder: BR Doncaster / English Electric
Engine: 4 EE432/A traction motors (750/650v DC third rail, 650v DC OHLE)
English Electric 836 DC booster
Power: 2, 552 hp (1, 900 kW) (maximum)
2, 300 hp (1, 720 kW) (continuous)
Wheel arrangement: Bo-Bo

The Class 71 (originally known as HA in the Southern Region's pre-TOPS classification scheme) operated off DC third rail. However the Class 71 was also equipped with a pantograph for use in yards such as Hither Green which had light-weight tram style DC overhead catenary as this was considered safer for staff walking about the yard than live rails [2]. The Class 71 worked boat trains, prestigeous expresses like the Golden Arrow and freights.

The Class 71 was equipped with a flywheel booster to handle gaps in the electric supply and could travel for short distances "off juice". However the Class 71's role was reduced as the sort of trains it was intended for were withdrawn or switched to multiple-units and using diesel or electro-diesel traction was more flexible. They had to be carefully diagrammed so they only worked yards and routes which had been electrified, an extra problem at night time and at weekends was where the power was turned off due to engineering work necessitating lengthy detours or replacement by diesel locomotives.

Withdrawals began in the 1960s with 10 removed from service to be converted into the Class 74 electro-diesel. The bulk of the fleet was laid up in late 1976 and withdrawn in 1977 [3]. One has been preserved.
71 001 preserved at NRM Shildon

[1] Brian Haresnape, Electric Locomotives (Ian Allan, 1983) p. 41
[2] Alan Williams, Southern Electric Album (Ian Allan, 1977) p. 90
[3] Pip Dunn, British Rail Main Line Locomotive Specification Guide (Crowood Press, 2013) p. 145