Class 01 (Andrew Barclay 153hp Diesel-Mechanical)

The Class 01 was a small class of shunter designed for use in shunting yards where there were tight curves and limited clearances which larger locomotives could not cope with. Four of the class, originally known as Class DY2 then D1/2, were built in 1965 for use for Eastern Region in the Stratford area [1]. A fifth was built a couple of years later for departmental service though returned to capital stock in 1967 [2].

Information
Number built: 5
Built: 1956-58
Builder: Andrew Barclay
Engine: Gardner 6L3 diesel
Power: 153 hp (114 kW)
Wheel arrangement: 0-4-0

Naturally such a small class of locomotive was doomed as the 1960s came to an end amid British Rail's determination to rationalise its locomotive fleet. However 2 of the class had an unlikely reprieve. Their small size meant they were suitable for use on the quarry breakwater tramway in Holyhead [3]. The 2 locomotives survived until 1982 and lasted long enough to carry TOPS numbers as 01 001 and 01 002.



Ironically though these 2 locomotives were scrapped and 2 of the other 3 which were withdrawn in the late 1960s ended up preserved after first being sold for industrial use.

Note: The Class 01 code has been reused in recent years for privately owned shunters that operate on National Rail metals as Class 01/5. 
Four views of D2953 preserved at the Heritage Shunters Trust




[1] Brian Haresnape, Diesel Shunters (Ian Allan, 1984) p. 51 
[2] Paul Smith & Shirley Smith, British Rail Departmental Locomotives 1948-1968 (Ian Allan, 2014) p. 25
[3] Rex Kennedy, Diesels & Electrics on Shed: Volume 1 - London Midland Region (Oxford Publishing, 1979) p. 66

London Underground 1986 Prototype Tube Stock

In the early 1980s plans were begun to replace the 1962 Tube Stock operating on the Central Line. As there were a number of new rail technologies and promising technical innovations available it was decided to built 3 prototype trains to evaluate a number of them [1]. Two of the trains (Style A and C) were built by Metro-Cammell and the third (Style B) by BREL Derby. The 3 trains were each given different colours to aid staff and passenger feedback. Style A was red, Style B blue and Style C green.

Information
Number built: 12 (3 4-car sets)
Built: 1986-87
Builder: Metro-Cammell (Style A & C (Red & Green))
BREL Derby (Style B (Blue))
Formation: Driving Motor (DM)+Trailer (T)+T+DM

Each prototype consisted of 2 2-car trains (with a cab at one end) semi-permanently coupled to form a 4-car train. The 3 types were all compatible with each other so any combination of 2-car sets could be used to create up to an 8-car train [2]. A number of different equipment types were trialled in each 2-car set so a working train could have a variety of power, control and braking systems. Air suspension, steerable bogies and onboard station indicators were also trialled. As well a variety of different interiors were trialled throughout the fleet.

The trains were used on the Jubilee Line for 2 years from 1988 to 1989 used in addition to the regular timetable, being withdrawn following a derailment at Neasden [3]. They also appeared on the Central Line for a display at Woodford [4] and the Aldwych branch of the Piccadilly Line in 1989 for an open day [5].

Following a public consultation the blue Style B train built by BREL proved to be the best received and BREL received the order for the 1992 Tube Stock which incorporated much of the technology and the best features of the 3 styles. One Driving Motor from the green Style C train has been preserved.

The 1986 Tube Stock, although not in service for long, did herald the future. The major innovation of the design was the extruded aluminium construction method and solid-state traction equipment which have been used on all subsequent tube designs [6].
Preserved car 16 (Style C) at the LT Museum Depot Acton

Style C interior

Style C cab

Another exterior view of car 16

[1] Paul Moss, London Underground (Haynes, 2014) p. 136
[2] J. Graeme Bruce, The London Underground Tube Stock (Ian Allan, 1988) p. 123
[3] Mike Horne, The Jubilee Line (Capital Transport, 2000) p. 61
[4] J. Graeme Bruce & Desmond F. Coombe, The Twopenny Tube (Capital Transport, 1996) p. 74
[5] Antony Badsey-Ellis & Mike Horne, The Aldwych Branch (Capital Transport, 2009) p. 73
[6] Piers Connor, The London Underground Electric Train (Crowood Press, 2015) p. 139

BEL 2 / NSR 1 Battery Locomotive

Battery powered trains go back quite a bit further into railway history than many people imagine. BEL 1 and BEL 2 were two similar battery electric shunters built in the early 20th century for the LMS' predecessor railways. BEL 1 was built for the Midland Railway at it's Derby Works later working in British Railways colours at Poplar Dock in East London [1]. It was withdrawn and cut up in 1964.

Information
Number built: 2
Built: 1913, 1917
Builder: Derby Works / NSR Stoke Works
Engine: 2 BTH traction motors (battery electric)
Power: 82 hp (61 kW)
Wheel arrangement: Bo

BEL 2 was built as NSR 1 for the North Staffordshire Railway at Stoke during the First World War, originally working at a copper works. It was withdrawn and restored to its original livery at Crewe in the mid-1960s and joined the National Collection at York [2].
Two views of BEL 2 at NRM York


[1] Brian Haresnape, Electric Locomotives (Ian Allan, 1983) p. 20
[2] Paul Smith & Shirley Smith, British Rail Departmental Locomotives 1948-1968 (Ian Allan, 2014) p. 22

Class 45 (BR/Sulzer 2,500hp Type 4 Diesel-Electric)

The Class 45 was the largest of the 3 "Peak" classes (the others being the prototype Class 44 and the follow-on Class 46 with different equipment) [1]. The Class 45s were the motive power mainstays of the Midland Main Line from the 1960s into the early 1980s. Like the other Peak classes the Class 45s were powerful locomotives though this power came at a price of high weight. Weighing in at over 130 tons they had to have 1Co-Co1 bogies with extra non-powered wheels to help spread the weight on the rail.

Information
Number built: 127
Built: 1960-62
Builder: BR Derby & Crewe
Engine: Sulzer 12LD28B diesel
Power: 2, 500 hp (1, 864 kW)
Wheel arrangement: 1Co-Co1

Design wise the Peaks shared some of their appearance with the LMS 10000 prototype diesel-electrics and North American practice with their bonnet noses - though the bonnets were noticably shorter than the English Electric Class 40 and Class 37.  The large grills on the side of the locomotive were intended to try and produce a cleaner design and hide the many apertures that had appeared on earlier and contemporary locomotive designs [2].


The Class 45 consisted of 2 sub-types, the 45/0 with steam train heating and the 45/1 with electric train heating. The arrival of the High Speed Train in the 1980s displaced them from express work though they continued on secondary passenger services and freights into the late 1980s. They were finally withdrawn by 1989 outlasting the other Peaks by a few years. Eleven have been preserved though not all currently are in working order.
45 060 at Kidderminster SVR

45 041 at Chinnor

45 140 at Birmingham New Street (K Davies Collection)

Front view of 45 041

Side view of 45 041 at Princes Risborough showing the large bogie

[1] Brian Haresnape, Production Diesel-Electrics Types 4 and 5 (Ian Allan, 1984) p. 31
[2] David Lawrence, British Rail Designed 1948-97 (Ian Allan, 2016) p. 116

Class 401 2-BIL

The Class 401 2-BIL (2 Bi-Lavatory - signifying the trains were 2 cars with a lavatory in each car) were built by Southern Railway in the mid-1930s as a development of the 4-LAV. The first 10 motor cars built by Metro-Cammell & BRCW with the rest built by Southern Railway itself at its Eastleigh and Lancing Works.

Information
Number built: 304 (152 2-car sets)
Built: 1935-38
Builder: (First batch) Birmingham Railway Carriage & Wagon Company, Metro-Cammell
(Later batches) SR Eastleigh, Lancing Works
Engine: 2 MV/EE339 traction motors, some later replaced by EE507C (660-750v DC Third Rail)
Power: 550 hp (410 kW) (EE339) / 500hp (279kW) (EE507C)
Formation: Driving Motor Brake Third class Lavatory (DMBTL)+
Driving Trailer Composite Lavatory (DTCL)

The 2-BILs were designed for long-distance semi-fast services on the newly electrified lines to Eastbourne, Portsmouth and Reading [1], later also being used on the Waterloo-Portsmouth route.

They had full-width bodies with a corridor and the aforementioned toilets [2] which were needed in both cars as there were no gangways between them [3]. The earliest were built with Metropolitan-Vickers power equipment with the rest built with English Electric.

The 2-BIL was a successful type and remained in service until 1971 with a number of sets receiving BR Blue livery [4]. A couple were also used as hauled coaching stock in surplus 4-SUB trailers as the 7-TC though it was not a true push-pull set [5]. One 2-BIL set has been preserved by the National Railway Museum.
Preserved 2090 at NRM Shildon

2067 at Farnham (K Davies Collection)

Another view of 2090

2034 in BR Blue, location unknown (K Davies Collection)

Cab side view of 2090


[1] Colin J Marden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 300
[2] David Brown, Southern Electric Vol 2 (Capital Transport, 2010) p. 104
[3] Alan Williams, Southern Electric Album (Ian Allan, 1977) p. 24
[4] Bruce Oliver, British Railway Southern Region Electrics in Colour (Ian Allan, 2008) p. 19
[5] Brown p. 112

London Underground Sleet Locomotives

The Central London Railway initially used electric locomotives hauling trailers but these were found to be causing problems with their large unsprung weights [1]. The locomotives were replaced in 1903 by electric multiple units, known as 1903 Stock. These in turn were replaced by Standard Stock in the 1930s, a number of 1903 Stock motor cars were then converted into Sleet locomotives to clear snow and ice from the track in 1939.
ESL 107 at LT Museum Acton



Information
Number built: 18
Built: (Original tube stock) 1900-03, 1913
Sleet Locomotives converted 1939
Builder: Birmingham Railway Carriage & Wagon Company
Metropolitan Amalgamated Railway Carriage & Wagon Company
Engine: GE66 traction motors (630v DC fourth rail)
Power: 960 hp (720 kW)

These were built by taking two driving ends to make a single locomotive [2]. Most sleet locomotives survived in service until the mid-1980s though as tube stock began to have its own de-icing equipment fitted their role reduced over the years, but they could also be used to clear leaves from the line. One locomotive ESL107 has been preserved, it is the only 1903 Stock to have survived.
Sleet locomotive ESL 107

Cab of ESL 107

1] J. Graeme Bruce & Desmond Croome, The Twopenny Tube (Capital Transport, 1996) p. 15
[2] John Glover, London Underground Rolling Stock in Colour (Ian Allan, 2009) p. 31