LYR Liverpool-Southport Electric Multiple Units

The route between Liverpool Exchange and Southport was one of the earliest to be electrified. In conjunction with Dick Kerr of Preston, the Liverpool & Yorkshire Railway built these electric multiple units which operated on tracks converted for 625v DC fourth rail. A live rail was placed at the side of the running rails, a return rail between the running rails. The line opened in March 1904 [3]. Fifty six cars were built which were marshalled as four car sets with 270 seats [2] in a mixture of first and third class, two trailers were marshalled in-between two motor cars at each end. The cars had a clerestory roof and, at the time of construction, were the widest passenger carriages built in Britain (304.8 cm) [4].
An EMU not longer after the entry into service [1]

Information
Number built: 92 (4-car sets)
Built: 1904-10
Builder: L&Y Newton Heath
Motor: 4 Dick Kerr 4-A electric motors per motor car (625v DC fourth rail)
Power: 600 hp (468 kW)
Formation: DM (Driving Motor)+TF (Trailer First)+TT (Trailer)+DM

Extra cars were built to strengthen services in the following years. Longer trains were operated during times of peak demand. Two special baggage cars were also built in order to reduce dwell times for normal services. Similar EMUs were built in 1913 for the line to Ormskirk. The units were replaced by the Class 502 in the early 1940s.
Side view of a Driving Motor [4]

Side view of first class trailer [4]

Inside a First Class Trailer [4]

Close-up of the connection between two cars [1]

[1] "The electrical equipment of the Liverpool & Southport division of the Lancashire & Yorkshire Railway", Street Railway Journal (Vol. XXIII No. 14) April 1904, p. 496
[2] H.M. Hobart, Electric Trains (D Van Norstrand, 1910) p. 87
[3] Colin J Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 188
[4] "Electrical equipment of the Liverpool, Southport & Crossens section of the Lancashire & Yorkshire Railway", Street Railway Journal (Vol. XXIII No. 5) January 1904, p. 172

Class 68 (Stadler/Vossloh 3,800hp Type 5 Diesel-Electric)

The latest diesel locomotives built for the UK mainline, the Class 68 is designed for mixed traffic work being capable of 100mp/h. The Class 68 is a UK version of the Stadler / Vossloh Eurolight family (known as the UKLight) built to fit within the UK loading gauge.
Chiltern 68 010 at Banbury

Information
Number built: 34 
Built: 2013-17
Builder: Vossloh / Stadler Rail
Engine: Caterpillar C175-16 diesel
Power: 3, 800 hp (2, 800 kW)
Wheel arrangement: Bo-Bo

The initial order by Direct Rail Services was for fifteen locomotives with deliveries beginning in 2014. Since then there have been follow-on orders to take the total up to thirty four.


The Class 68 spends a lot of its time on passenger services with the Chiltern Main Line express being a major task for the type. Some have been painted in Chiltern colours, with others in DRS livery. The Class 68 also haul (and pushes) passenger trains for Trans Pennine Express. The Class 68 is a true mixed-traffic locomotive and can also be found on freight trains and engineering trains.

The Class 68 has been joined by an electro-diesel bi-mode version of the UKLight known as the Class 88.
TPE 68 023 heads through Winsford

DRS 68 009 at Birmingham Moor Street

Chiltern 68 015 at Marylebone

DRS 68 009 propelling a Chiltern express at Leamington Spa

Cab view

The Cheltenham and District Light Railway

The Cheltenham and District Light Railway was an electric tramway company which operated between 1901 and 1930. The tramway, which was to 1, 067mm gauge, eventually operated a network of nearly seventeen kilometres in Cheltenham with routes operating from Cheltenham Spa railway station. The tramway was replaced by buses in the late 1920s with the last tram operating on December 21 1930.
One of the original trams [1]

Information for original cars
Number built: 18
Built: 1901
Builder: John Stephenson Company

The company's initial fleet were built by the American manufacturer John Stephenson. The trams used Peckham 9AX trucks and had a capacity of fifty seated passengers [1]. Later trams for the company were built by English Electric in the 1920s, one of these has been preserved.

[1] "An interesting Stephenson car", Street Railway Review Vol. XI No. 8 (Aug 15, 1901) p. 517

Hudswell Clarke D1199

The Manchester Ship Canal Company maintained a huge railway network, which at it's peak contained over 370km of track and operated seventy-five locomotives. D1199 was one of those locomotives, built for the MSC Railway in 1960 by Hudswell Clarke. It was just one of a number of locomotives built for the MSC Railway by the company [1] and carried the number E1 (or MSC Engineers No. 1). Due to the tight radiuses of the track, typical of many an industrial railway, the locomotive had a small wheelbase.
E1 at Peak Rail

Information
Number built: 1
Built: 1960
Builder: Hudswell Clarke
Motor: Gardner 8L3 diesel
Power: 204 hp (150 kW)
Wheel arrangement: 0-6-0DM

The MSC network began to close down in the late 1960s and 1970s though the last operational section was not closed until 2009. E1 however entered preservation before that, first being preserved at Bury and in recent years at Peak Rail.

[1] Ray King, British Industrial Diesel Locomotives (Traction & Rolling Stock Advertiser, 2006) p. 26

Plymouth Corporation Tramways

The Plymouth Corporation Tramway began in 1892 when it took over the 1, 067mm gauge horse-drawn Plymouth Tramways Company. Work began to convert the tramway to electric in 1898 with the first electric trams operating in January 1899. The first electric trams operated by the corporation were six G.F. Milnes trams which had Westinghouse electric equipment and Peckham cantilever trucks. These trams could also haul a trailer car. They remained in service until 1929.
Plymouth Corporation Tram [1]

Information for original cars
Number built: 6
Built: 1898
Builder: G.F. Milnes
Motor: 2 Westinghouse 46 electric motors (550v DC OHLE)

The fleet continued to grow throughout the subsequent decades, the Plymouth Corporation taking over other networks in the area in 1914. However by the 1930s the tram network was in need of renewal but, as with most tram networks at the time, there was little money or enthusiasm for renewal and replacement of trams with motor buses began. Replacement with buses was put on hold due to the Second World War (trams were powered by home grown coal, buses needed imported oil!) The worn down network was not spared by bomb damage in the war, the final trams operating in September 1945.
Plymouth Corporation Tram (Public Domain, Wikimedia Commons)

[1] "Plymouth Corporation Tramways", Street Railway Journal (September 1899) Vol. XV No. 9, p. 589

GWR AEC Railcar

Several railway companies experimented with petrol and diesel railcars in the early part of the twentieth century, the GWR had a fleet of AEC powered railcars which were arguably the most successful type to be built until the advent of the British Railway DMU in the 1950s. Indeed it can be said that the success of these railcars established the viability of diesel railcar for operation on Britain's railways in the future [1]. The first railcar entered service in 1933 operating between London Paddington and Reading though with just a single engine was considered rather underpowered having a top speed of just 45 mp/h (72 km/h), all subsequent railcars had two engines and subsequently much better performance.
Preserved W4W, a Park Royal example, at NRM York

Information
Number built: 38
Built: 1934-42
Builder: Park Royal, Gloucester Railway Carriage & Wagon Company,
GWR Swindon
Motor: 1 or 2 AEC 6-cylinder diesel
Power: 121 / 242 hp (90 / 180 kW)

The railcars were built in a number of batches throughout the 1930s and early 1940s. Park Royal built the first four, the Gloucester Railway Carriage & Wagon Company building the next thirteen. One of these was a dedicated parcels van, later railcars also had buffers and draw gear to haul stock. The rest of the fleet was built at the GWR's own Swindon works in the early 1940s. These differed from the earlier railcars in having an angular boxy exterior [2] as opposed to the Art Deco streamlined look of the earlier railcars (which had earned them the nickname of "Flying Banana"). The last few railcars built had cabs at one end only (gangways at the other) and were used in two-car sets [3].

The railcars remained in service until the 1960s used on Western Region branch lines. Three have been preserved.
Side view of W4W

W31W at London Paddington (KD Collection)

Front view of W4W

[1] Brian Haresnape, Diesel Multiple Units: the First Generation (Ian Allan, 1985) p. 11
[2] Colin J Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 4
[3] Haresnape p. 10