NER Electric Shunter 1 (Class ES1)

A mile long freight branch from Newcastle Quay was electrified by the North Eastern Railway at the start of the 20th century because steam locomotives were proving hard to use on the line. The line had a tunnel with a very sharp hairpin bend in it so that both mouths were pointing in the same direction. This often meant that the exhaust from steam locomotives (which had to work hard because of the gradients in the tunnel) became trapped making conditions very difficult if not dangerous for crews [1]. Two electric shunting engines were instead built for this line by Brush using BTH electrical equipment collecting 600v DC current from overhead lines and third rail (in the tunnel). At the time of construction they were the largest electric locomotives built in the UK [2].

Information
Number built: 2
Built: 1903-04
Builder: British Thomson-Houston/Brush
Engine: 4 GE/British Thomson-Houston 55 traction motors
(600-630v DC third rail & OHLE)
Power: 640 hp (477 kW)
Wheel arrangement: Bo-Bo

Although they spent most of their time on freight shunting they could also work with NER's Tyneside EMUs in the same area [3] at South Gosforth MPD [4]. They later passed into the LNER fleet and finally British Railways where they became known as the Class ES1. They were finally retired in 1964, Number 1 was preserved and can now be found at NRM Shildon.
Three views of Number 1 now preserved at NRM Shildon



Number 2 in original condition with bow style collector, public domain image [5]

Side view of Number 2 notice the third rail shoes deployed, public domain image [6]
[1] Brian Haresnape, Electric Locomotives (Ian Allan, 1983) p. 7
[2] "Electric freight locomotives for the North East of England", The Street Railway Journal October 1904 (Vol XXIV No. 15) p. 674
[3] R.L. Vickers, DC Electric Trains and Locomotives in the British Isles (David & Charles, 1986) p. 57
[4] David Dunn, Tyneside Electrics: 2 (South Shields Branch & System Miscellany) (Booklaw, 2016) p. 37
[5] Street Railway Journal p. 675
[6] Street Railway Journal p. 676

Class 506 (Metro-Cammell / Birmingham Railway Wagon and Carriage Company LMR Manchester Suburban Services 3-car)

The Class 506 was built for the electrification of the LNER Woodhead route between Manchester (London Road) and Sheffield [1] and the Glossop branch. The electrification of the line had begun in the late 1930s but due to the war was not completed until the early 1950s. These units, built to the same design as the AC electric Shenfield line Class 306 [2], but drawing on 1500v DC overhead electric spent their working lives on the Hatfield and Glossop line [3].

Information
Number built: 24 (8 3-car sets)
Built: 1954
Builder: Metro-Cammell / Birmingham Railway Carriage and Wagon Comany
Engine: 4 GEC traction motors (1500v DC OHLE)
Power: 740 hp (555 kW)
Formation: Driving Motor Brake Standard (DMBS)+Trailer Composite (TC)
+Driving Trailer Standard (DTS)

later TC became a Trailer Standard (TS)

They were built with first class accommodation in the central trailer but this was declassified in 1960. Although they physically could have operated elsewhere on the Woodhead route the Class 506s seldom left their line. The Woodhead route was closed East of Hatfield in 1981 but the Class 506s continued in service until their line was converted to AC electrification in 1984. They became the last mainline trains to operate using the once standard 1500v DC overhead line method. All that remains of the class is a single severed cab that has survived into preservation.
This cab of M508404M is all that survives

The pantograph can be seen on the cab roof

[1] Alec Swain, Overhead Line Electric-Multiple Units (Ian Allan, 1990) p. 21
[2] Colin J. Marsden, DMU and EMU Recogition Guide (Ian Allan, 2013) p. 384 
[3] Alan Whitehouse, The Woodhead Route (Ian Allan, 2014) p. 38

Vale of Rheidol Number 10 (BMR002)

Diesel shunter Number 10 (works number BMR002) performs shunting and hauls engineering trains on the narrow gauge Vale of Rheidol railway between Aberystwyth and Devil's Bridge. The locomotive was bought while the railway was still part of British Rail (until 1989) and thus was the last shunter bought by BR!

Information
Number built: 1
Built: 1987
Builder: Brecon Mountain Railway / Baguely Drewry
Engine: Caterpillar diesel
Power: 165 hp (123 kW)
Wheel arrangement: 0-6-0

The locomotive was built at the Brecon Mountain Railway at Pant from parts obtained by Baguely Drewry [1] when that company went out of business. Number 10 is a diesel hydraulic. Two similar locomotives are also operated by the Ffestiniog Railway.
Number 10 shunts coaching stock at Aberystwyth

Bringing the train in

Number 10 is painted in GWR Brunswick green to match the VoR's steam fleet

[1] Vic Mitchell, Corris & Vale of Rheidol (Middleton Press, 2009) p. 90

Thomas Hill Sentinel rebuilds

The small diesel shunter Thomas Hill Class 188c is interesting as it started life as a steam locomotive! It is one of a number of Sentinel vertical boiler steam locomotives converted to diesel in the 1960s by Thomas Hill of Rotherham.

Information
Builder: (Original) Sentinel Wagon Works
(Rebuild) Thomas Hill
Engine: Rolls Royce C6 diesel
Power: 170 hp (126 kW)
Wheel arrangement: 4wDH

Conversion involved replacing the steam boiler with a Rolls Royce diesel locomotive, adding diesel-hydraulic transmission and new buffer beams plus changes to the superstructure. Thomas Hill 188c was built in 1955 as a steam locomotive and converted in 1967 to diesel. It was used by the CEGB at the North Stella power station before passing into preservation, one of a number now preserved.
Thomas Hill 188c at Wirkworth on the EVR

Thomas Hill 111c at the Foxfield Railway

Another view of 188c

LMS 7400 (7050)

The LMS was an early pioneer of diesel traction and built a number of experimental diesel shunters in the early 1930s. Number 7050 (originally allocated the number 7400) was the smallest of these. It was built by Drewry (establishing what would become the very familiar look of their shunters) at the EE Dick Kerr works in Preston [1].

Information
Number built: 1
Built: 1934
Builder: Drewry Car / EE Dick Kerr
Engine: W H Allan 8RS18
(Later) Gardner 6L3
Power: 160 hp (120 kW) (Allan)
153 hp (114 kW) (Gardner)
Wheel arrangement: 0-4-0

Although a small shunter, 7050 had an impressive performance and was able to haul up to 400 tons. It was sold to the War Department in World War 2 and remained in MoD service until being preserved in 1979 [2]. It is during its military service that the original Allan engine was replaced by a Gardner one. It is now part of the national collection at York.
LMS 7050 at the National Railway Museum, York

At the time 7050 was in the NRM Great Hall

Front view of 7050, note the taper on the bonnet


[1] Brian Haresnape, Diesel Shunters (Ian Allan, 1984) p. 6
[2] Colin J. Marsden (ed.), "The LMS Designs", Modern Locomotives Illustrated No 217 February-March 2016 (SR, GW, LNER, LMS & Trial Shunters & Class 03) p. 4

London Underground Standard Stock / 1923 Tube Stock / Pre 1938 Tube Stock

As the 1920s dawned the London tube network was growing rapidly but there was also a need to replace much of the first generation tube stock which has mostly been built without air operated doors. To fulfil this need for a lot of rolling stock what became known as Standard Stock was built over an eleven year period though in a number of production batches. They have also been called 1923 Tube Stock and Pre 1938 Tube Stock (the 1938 Tube Stock being the next major type to be built).

Information
Number built: 1466
Built: 1923-34
Builder: Birmingham Railway Carriage & Wagon Company, Cammell Laird,
Gloucester Railway Carriage & Wagon Company, Leeds Forge,
Metropolitan-Cammell, Union Construction Company
Motor: GEC WT54 or Metropolitan-Vickers MV152 traction motors (630v DC fourth rail)

To start with six experimental cars (5 trailers and 1 control trailer) were ordered in 1922 for evaluation purposes [1], they came from a variety of manufacturers who were given a general specification for the trailers but free to follow their own design internally [2] though the stock generally had the same external appearance. These cars were later known as 1922 Tube Stock or Competition Stock.

The control trailers and motor cars were a Underground Group design with a wooden mock-up being built at Golders Green of what would soon be a very familiar sight to London's commuters [3]. The first production order came in 1923 for 191 cars. Further orders came in subsequent years for extensions to the tube network and also as original plans to retrofit earlier stock with air doors were abandoned. The Standard Stock trains to start with used a mixture of GEC and Metropolitan-Vickers electrical equipment, the equipment being stored in switch compartments behind the cabs in the motor cars.

As the 1920s continued more orders were placed but differences were made to the design. Production builds in 1926 and 1927 began to have British Thomson-Houston traction equipment which had been used on earlier tube stock and proved to be more reliable than GEC and MV's equipment [4]. The 1927 batch also had modified bogies with smaller wheels. Batches made in the 1930s had electro-pneumatic brakes and modified control equipment to allow for higher speeds. After the completion of the final production batch in 1934 a total of 1466 cars had been built comprising 645 motor cars, 270 control trailers and 551 trailers.

Standard Stock operated on the Northern, Piccadilly and Bakerloo Lines of the Underground. Later on they were also ran on the Central Line. Originally built as 5-car trains later batches were ordered as 6 or 7 cars, some were later run as 8 car trains [5]. Some shorter formations were also run such as on the Piccadilly Aldwych branch [6].

By the 1950s the Standard Stock fleet was starting to wear out, many had been stored in the open air during the war and this hadn't done them much good. They were unable to cope with the more intensive service patterns required. Replacement took place in the early 1960s with the last Standard Stock passenger trains being run on the Northern City Line in 1966. Some continued in departmental use until 1978.

The story of Standard Stock was not over though. In the late 1960s the Isle of Wight was in need of EMUs for its soon-to-be electrified Island Line. A number of Standard Stock cars became the Class 485 and 486 EMUs for British Rail [7]. They served on the Isle of Wight until 1991, nearly 70 years after the building of the first experimental cars!
Preserved 3327 at London Transport Depot

Former L131 departmental vehicle at LTM Depot Acton

Front view of 3327

Cab of 3327 
3327 interior

Note the switch compartment behind the cab

[1] Brian Hardy, Underground Train File Tube Stock 1933-1959 (Capital Transport, 2001) p. 21
[2] J. Graeme Bruce, The London Underground Tube Stock (Ian Allan, 1988) p. 53
[3] Paul Moss, London Underground (Haynes, 2014) p. 65
[4] Piers Connor, The London Underground Electric Train (Crowood, 2015) p. 48
[5] Piers Connor, "The London Electric Train: a post-script", Underground News No. 670 (October 2017) p. 683
[6] Antony Badsey-Ellis & Mike Horne, The Aldwych Branch (Capital Transport, 2009) p. 68
[7] Brian Hardy, Tube Trains on the Isle of Wight (Capital Transport, 2003) p. 13