Class 55 (English Electric 3,300hp Diesel-Electric "Deltic")

In the early days of British Rail dieselisation the largest locomotives were known as the Type C with over 2,000hp. However it was soon clear that more powerful locomotives would be needed for the principal expresses and heaviest freight though none existed at the time - until the arrival of English Electric's incredible Deltic prototype in 1955 with 2 innovative Napier Deltic engines and 3,300hp to play with. BR revised its power classifications to the now familiar Types 1 to 5 with the Type 5 for locomotives over 3, 000hp [1].

With high power and a relatively low weight (the Deltic was 32 tons lighter than a Class 45 but brought 800hp more to the table) the Deltic proved itself on top BR expresses and a production order for 22 was made to replace ex-LNER Pacifics on the East Coast Main Line [2]. The production Deltics differed in appearance to the prototype and construction, one problem with the prototype had been its awkward size which limited its route availability, the production Deltics were somewhat slimmer and a bit longer [3].

Information
Number built: 22
Built: 1961-62
Builder: English Electric Vulcan Foundry
Engine: 2 Napier Deltic 18-25 diesels
Power: 3, 300 hp (2, 460 kW)
Wheel arrangement: Co-Co

The Class 55s as they became known performed admirably on the ECML until being replaced by the High Speed Train in the late 1970s with a final withdrawal from service at the end of 1981. Although they still had a lot to offer the Class 55s were expensive to maintain and the small fleet made them uneconomic. Six Class 55s were preserved as well as the prototype, the diesels (along with the Western Class 52s) attracting a level of popularity and interest not seen since the end of steam.

This wasn't the end of the Deltic story however, in the mid-1990s the Class 55s made a return to National Rail service with 4 being mainline certified [4] and are often used for charter services and spot hire, even hauling freights.
D9002 at Kidderminster SVR

55 019 at Kidderminster SVR

55 019 at Bewdley

D9002 again

55 019 approaches a train

Side view of D9002


[1] Brian Haresnape, Early Prototype and Pilot-Scheme Diesel Electrics (Ian Allan, 1981) p. 11
[2] Haresnape, Prototypes p. 31
[3] Brian Haresnape, Production Diesel Electrics Types 4 and 5 (Ian Allan, 1984) p. 42
[4] Colin J. Marsden, Traction Recognition (Second Edition) (Ian Allan, 2008) p. 48

Class 373 Eurostar e300

A dream for many years the Channel Tunnel was finally opened in 1994, the Class 373 Eurostar e300 was built for high-speed intercity services between London and the continent. The Class 373 is part of the French TGV family though designed to fit in the smaller British loading gauge. The Class 373 was designed to use 25kV AC overhead line power, 3kV DC overhead (for use in Belgium) and 750v DC third-rail for use in the South of England. Some French owned sets could also use 1.5kV DC overhead. However the DC third rail provision was removed when the 25kV AC overhead-line electrified HS1 railway line was opened in Kent [1].

Information
Number built: 733 (31 20-car and 7 16-car sets + 1 spare power car)
Built: 1992-96
Builder: GEC Alsthom 
Engine: Alsthom traction system (25kV AC OHLE, 3kV DC OHLE & 750v DC third rail)
Power: 16, 400 hp (12, 200 kW) 25kV AC
7, 600 hp (5, 700 kW) 3kV DC
4, 600 hp (3, 400 kW) 750v DC third-rail
Formation: (20 car) Driving Motor (DM)+Motor Standard (MS)+
Trailer Standard (TS)+TS+TS+TS+
Trailer Brake Kitchen (TBK)+Trailer First (TF)+
TF+Trailer Brake First (TBF) +TBF+TF+TF+TBK
+TS+TS+TS+TS+MS+DM

The Class 373s were ordered for British Rail and the French and Belgian state railways SNCF and SNCB for services from London to Paris and Brussels. Some of the British sets were shorter (at 16 cars - known as 373/2 - the rest of the fleet is 373/1). These "North of London" sets intended for services from the continent to British cities in the North along the WCML and ECML however these services never came to fruition. After rail privatisation the British Rail owned sets were owned by Eurostar.

For a number of years in the early 2000s some Class 373s were leased to GNER for services from London Kings Cross to York and Leeds however there were some problems and restrictions in using the trains due to their length and power needs.

Since the arrival of the new Class 374 e320 some Class 373s have been scrapped, others have been refurbished. Some French owned sets are now used on domestic services with SNCF.
Preserved 3308 at NRM York

Side view of 3308

A Eurostar approaches St Pancras International, over a somewhat older mode of transport!

[1] Colin J Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 281

Class 117 (Pressed Steel Co. Suburban Services 3-car)

The Class 117 DMU was another first generation DMU built to the standard BR Derby design but manufactured by Pressed Steel, who had spare capacity at the time. These units were built for the modernisation of the London division of Western Region [1] and were built for high density routes. They had toilets in the trailer but originally had no gangways so if you were in one of the motor cars you were ought of luck! Gangways were later fitted and the units received full refurbishment in the late 1970s [2]

Information
Number built: 123 cars (41 3-car sets)
Built: 1959-61
Builder: Pressed Steel
Engine: 2 BUT (Leyland) 6-cyl diesels per power car
Power: 600 hp (450 kW)
Formation: Driving Motor Brake Standard (DMBS)+Trailer Composite Lavatory
(TCL)+Driving Motor Standard (DMS)

Some units later moved to Birmingham where they operated on the Cross City line and in Scotland. They remained on Cross City and London services until well into the 1990s and the last were finally withdrawn in 2000. Twelve cars have been preserved.
W51354, a DMBS, at Rowsley South

08 830 and W51534

[1] Colin J Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 72
[2] Brian Haresnape, Diesel Multiple Units: The First Generation (Ian Allan, 1985) p. 59

Kerr Stuart 4421

Kerr Stuart was a locomotive manufacturer based in Glasgow and Stoke-on-Trent which started in the 1880s. The company went into receivership in the early 1930s, its assets being bought up by Hunslet. Although mostly known for narrow and standard gauge steam locomotives towards the end of Kerr Stuart's existence they also built a number of diesel locomotives of which 4421 was one.

Information
Number built: 2
Built: 1929
Builder: Kerr Stuart
Engine: Mercedes-Benz 6-cylinder diesel
Power: 90 hp (1,305 kW)
Wheel arrangement: 6wDM

4421 was one of two locomotives built in 1929 as demonstrators for industrial use, it worked on a standard gauge branch line of the otherwise narrow gauge Ravenglass & Eskdate Railway from Murthwaite to Ravenglass hauling wagons loaded with crushed granite. When the quarries were closed in 1953 4421 then worked as an industrial locomotive with the National Coal Board being rebuilt with a Dorman diesel engine in 1959. It moved onto Rom River Reinforcement in the late 1960s before finally being preserved at the Foxfield Railway in 1985.

Kerr Stuart diesel locomotives like 4421 used mechanical transmission with a chain final drive. The diesel engine of 4421 had a JAP petrol engine to start it. After being rebuilt with the Dorman engine 4421 had an electric starter.
4421 at the Foxfield Railway

Class 07 (Ruston & Hornsby 275hp Diesel-Electric)

After the Second World War the Southern Railway bought a number of second hand (ex-US Army) steam tank locomotives for the Southampton Docks, the Class 07 was built in 1962 to replace them. The Class 07 was a compromise between small diesel-mechanical shunters and the larger diesel-electric Class 08/09s, having a small wheel base as needed for sharp curves in the docks but being heavier and more powerful in able to shunt heavy Ocean Liner trains [1][2]. They could also be used for local trip working and were fitted with marker lights for this though they were found to suffer from hot axle boxes if running at speed for extended period and so tended to be restricted to shunting.

Information
Number built: 14
Built: 1962
Builder: Ruston & Hornsby
Engine: Paxman 6RPHL Mark III diesel
Power: 275 hp (205 kW)
Wheel arrangement: 0-6-0

The change to container traffic saw the docks area railway system run down, they were redundant by the late 1970s and were withdrawn from BR service in 1977 [3] though a number were sold on for industrial use and one serving in the departmental fleet at Eastleigh Works [4]. Ruston & Hornsby also built a version of the Class 07 for industrial use as the LSSE.

A number have also been preserved.
07 001 at the Heritage Shunters Trust 
2987 in BR days (KD Collection)

Another view of the preserved 07 001


[1] Brian Haresnape, Diesel Shunters (Ian Allan, 1984) p. 73
[2] Heritage Shunters Trust Stock List (2016) p. 9
[3] J.A.M. Vaughan, Diesels on the Southern (Ian Allan, 1980) p. 9
[4] Colin J Marsden, Departmental Stock (Ian Allan, 1984) p. 111

NER Tyneside Electrics

At the turn of the century many local lines were facing increased competition from the growing network of electric street cars (trams) and like a number of railway companies the North Eastern Railway turned to electric traction for its Tyneside network [4]. The EMUs were built at NER's York workshop with British Thomson-Houston electrical equipment and ran on a 600v DC third rail network which opened between Newcastle New Bridge Street and Benton in 1904, extending to Tynemouth later in the year [5] with further extensions in the following years.

Information
Number built: 157 (3-8 car sets plus MPVs)
Built: 1904-22
Builder: NER York / British Thomson-Houston
Engine: 2 British Thomson-Houston traction motors (600v DC third rail) 
Power: 250 hp (186 kW) final batch 280 hp (208 kW)

The EMUs were built to the NER's style with clerestory roofs. The original batch of 88 vehicles included driving motor cars (both with first/class class compartments and all third [6]), trailers and motor parcel vans which had a compartment for fish! Another 35 cars were built in 1915. However disaster occurred in 1918 when a fire at Walkergate Car Sheds destroyed 34 cars held inside [7].

Thirty-four replacement cars were built between 1920 and 1922. These had more powerful BTH motors (140hp as opposed to the original 125hp motors) and an elliptical roof instead of a clerestory. The original stock was replaced by newer units built by Metro-Cammell in the 1930s but the 1920-22 stock remained in service until it was replaced by Class 416 EMUs in 1955. One 1904 built parcel van has been preserved.
Public domain image [1]

Motor Parcel Van, Public domain image [2]

Public domain image [3]

[1] Charles H Grinling, The ways of our railways (Ward Lock, 1910) p. 172
[2] "Electric express car for the North Eastern Railway of England", Electric Railway Journal Vol XXXIII No. 14 (1909) p. 609
[3] "New motor cars for the North Eastern Railway of England", Electric Railway Journal Vol XXXIV No. 8 (1908) p. 290
[4] Brian Haresnape & Alec Swain, Third Rail DC Electric Multiple Units (Ian Allan, 1989) p. 15
[5] David Dunn, Tyneside Electrics: 1 (Book Law, 2016) p. 4
[6] Colin J Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 182
[7] R.L. Vickers, DC Electric Trains and Locomotives in the British Isles (David & Charles, 1986) p. 56