Lion

In the early 1960s British Railways issued a specification for a new Type 4 diesel locomotive, more powerful than earlier types [1]. A number of prototypes were built, privately funded by the manufacturers. The Birmingham Railway Wagon & Carriage Company, in partnership with Sulzer and AEI, built the rather striking prototype Lion. 
Lion passing Tilehurst [4]


Information
Number built: 1
Built: 1962
Builder: Birmingham Railway Wagon & Carriage Company
Motor: Sulzer 12LDA28-C diesel
Power: 2, 750 hp (2, 050 kW) 
Wheel arrangement: Co-Co

Lion visually resembled one of the other prototypes, the Class 53 Falcon and the Class 35 Hymek thanks to design supervision from Wilkes & Ashmore. Lion was given a striking but rather impractical all-over white livery, even the underframe and bogies! Mechanically Lion was a development of the Peaks such as the Class 44 though with a twin-bank Sulzer engine and lower weight.

Lion's working life was short, being only used for about a year. Evaluation mostly took place in BR's Western and Eastern regions [2] and not without technical problems [3]. BR decided to award Brush Traction the contract for the Class 47. Lion itself was withdrawn in 1964 and broken up, though the engine was reused in a production Class 47.

[1] David Lawrence, British Rail Designed 1948-67 (Ian Allan, 2016) p. 139
[2] Colin J Marsden, Diesel & Electric Recognition Guide (Ian Allan, 2011) p. 36
[3] Lawrence p. 141
[4] "A study in diesels", Meccano Magazine (February 1964) p. 585

Liverpool Corporation Tramways Baby Grand Car

The Baby Grands were the last of a series of streamlined trams built at the Liverpool Corporation Edge Lane works in the 1930s and early 1940s to modernise the Corporation's fleet. The Baby Grands were a simpler, smaller (and therefore cheaper) single truck (which was EMB built) version of the double bogie Streamliner tram which had a high power consumption [1]. The Baby Grand fleet mostly survived until the end of Liverpool Corporation Tramway in 1957.
245 at the Wirral Tramway Museum


Information
Number built: 100
Built: 1937-42
Builder: Liverpool Corporation
Motor: 2 BTH 116 electric motors (550v DC OHLE)
Power: 120 hp (89 kW)

Two Baby Grands has been preserved, 245 was one of the trams which took part in the final parade before Liverpool's tram system shut down. It has now been restored back to running order by the Merseyside Tramway Preservation Society. Tram 293, which made the final trips on the tram network, is at the Seashore Trolley Museum in the USA.
245 alongside slightly older trams

Another view of 245



[1] Martin Jenkins & Charles Roberts, Merseyside Transport Recalled (Ian Allan, 2014) p. 27

Class 144 Pacer (Walter Alexander / BREL Derby Local & Secondary Services 2 and 3-car)

The Class 144 Pacer was a follow-on from the Class 143. It has a Walter Alexander built body almost identical to the 143 but with a chassis built by BREL Derby.

Northern 144 008 at Sheffield

Information
Number built: 56 (23 2 and 3-car sets)
Built: 1986-86
Builder: BREL Derby & Walter Alexander
Engine: Cummins LTA10-R diesel per car
Power: 450/675 hp (330/495 kW)
Formation: (2-car) Driving Motor Standard (DMS)+
Driving Motor Standard Lavatory (DMSL)
(3-car) DMS+Motor Standard (MS)+DMSL

The Class 144 was ordered for services in West Yorkshire [1]. To cope with an increase in passengers West Yorkshire PTE later ordered 10 extra Motor Standard trailers to augment ten trains to 3-cars. These were the only vehicles in the large Pacer fleet to have no driving cabs. The Class 144 was originally built with Leyland TL11 engines but these were later replaced by Cummins diesels. The original transmission has also been replaced with a Voith diesel-hydraulic system [2].


As with the rest of the Pacer fleet the Class 144s were withdrawn during 2020. One Class 144 was experimentally modified as the Class 144e (for Evolution) to meet future accessibility standards and had an accessible toilet and a new interior/seating [3], however no others were modified to 144e standard and replacement stock was instead ordered. 

Thirteen Class 144s have been preserved with a number of others sold on for non-railway use including a couple which will become school classrooms!
Three car 144 020 at York

Northern 144 013 at Sheffield

Pacer front end comparison: Northern 142 023 and 144 020 at York

Northern 144 017 at Sheffield

[1] Brian Haresnape, Diesel Multiple Units: The Second Generation and DEMUs (Ian Allan, 1986) p. 78
[2] Colin J. Marsden, DMU and EMU Recognition Guide (Ian Allan, 2013) p. 127
[3] Colin J. Marsden, Rail Guide 2016 (Ian Allan, 2016) p. 91

Robert Hudson Fordson "Go-Go Tractors"

The Fordson tractor was a mass produced tractor built by the Ford Motor Company from 1917 onwards, Robert Hudson adapted the engine, gearbox and drivetrain to create a locomotive that could run off petrol, diesel and other fuels. The "Go-Go Tractor", as it was referred to, was produced from the 1920s onwards. The Ford engine was connected to the tractor axle via a roller chain. The resulting locomotive was simple, one major drawback was that as it utilised the original tractor gearbox it had three gears in one direction and only one in the other, not so much a problem for an agricultural tractor but a limitation for a bi-direction locomotive.
36863 / 1929 at the Statfold Barn Railway

Information
Builder: Robert Hudson
Motor: Ford 4-cyl various fuels
Power: 20 hp (15 kW)
Wheel arrangement: 4wPM or 4wDM

The two Go-Go Tractors pictured operated on petrol or paraffin. Both are preserved at the Statfold Barn Railway and are 610mm gauge.
39924 / 1924 at Statfold Barn, formerly worked at Cairngryffe Quary in Lanarkshire

Another view of 36863


Class 175 Coradia 1000

The Class 175 is part of the Coradia DMU family, along with the Class 180. They were built for long-distance services in Wales and the North West in the early privatised railway years [1]. The fleet was originally operated by First North Western, then Wales & Borders before being transferred to Arriva Trains Wales in 2004. Nowadays they are operated by ATW's successor Transport for Wales. Some were leased to First TransPennine Express for a time.
Transport for Wales 175 008 at Shrewsbury



Information
Number built: 70 (27 2 or 3-car sets)
Built: 1999-2001
Builder: Alstom Birmingham
Motor: Cummins N14 diesel per car
Power: 900 hp (670 kW) / 1, 350hp (1, 005kW)
Formation: (175/0) DMSL (Driving Motor Standard Lavatory)+DMSL
(175/1) DMSL+MSL (Motor Standard Lavatory)+DMSL

The Class 175 has two sub-classes, the 175/0 being 2-car sets (eleven sets) and the 175/1 3-car (sixteen sets). All Class 175 cars are powered, and - importantly for long-range routes - have toilets!
Arriva Trains Wales 175 002 at Crewe

TfW 175 008 arrives at Hereford

TfW 175 008 again, this time at Church Stretton

A year earlier 175 008 is in ATW livery at Manchester Piccadilly

TfW 175 003 at Crewe



[1] Colin J. Marsden, DMU and EMU Recognition Guide (Ian Allan, 2018) p. 164

Class D3/7 (LMS/English Electric 0-6-0 Diesel-Electric)

The Class D3/7 was built for general and hump shunting at Toton (for which they were found to be suited [1]) by the LMS in the late 1930s. The D3/7 did have a notable difference from some of the other pre-war diesel shunters in that it had a long wheelbase jackshaft drive to the wheels.
LMS 7080 on delivery [3]


Information
Number built: 40
Built: 1939-42
Builder: LMS Derby Works, English Electric
Motor: English Electric 6KT diesel
Power: 350 hp (261 kW)
Wheel arrangement: 0-6-0

Delivered during the Second World War, the LMS lost many of the class to the War Department. Ten of these never returned from overseas service and survived in the post-war Egyptian and Italian railways. The rest were transferred to British Railways and remained in service until the 1960s. The last was withdrawn in 1967 [2].
Cab view [3]



[1] Brian Haresnape, Diesel Shunters (Ian Allan, 1984)  p. 27
[2] Colin J Marsden, Diesel & Electric Locomotive Recognition Guide (Ian Allan, 2011)  p. 13
[3] "New LMS Shunting Locomotives", Meccano Magazine (September 1939) p. 554