Class 09 (BR Darlington / English Electric 400hp Diesel-Electric)

A relatively tiny adjutant to the huge Class 08 shunter fleet, twenty six Class 09s were built for Southern Region. They were almost exactly the same as the 08 but had different gearing [1] to allow a top speed of 27.5 mp/h [2] (compared to the Class 08's 15 mp/h) and waist high air brake connections for working with Southern multiple-units. Because of this different gearing they have a lower tractive effort than the 08s.

Information
Number built:	38 (including 12 conversions from Class 08)
Built:	1959-62 1992-93 (09/1 and 09/2 conversions)
Builder:	BR Darlington & Horwich 09/1 and 09/2 conversions by RFS Kilnhurst
Engine:	English Electric 6KT
Power:	400 hp (268 kW)
Wheel-arrangement:	0-6-0

In the early 1990s twelve more Class 09s were built from 08s to fulfil a need for faster shunters [3]. These later conversions, known as the 09/1 and 09/2, lack the high-level air brake connections (the original locomotives became 09/0). The main difference between the two later sub-classes is that the 09/1 has an 110v electrical equipment and the 09/2 90v.

Although the Class 09s spent most of their time on shunting duties there were the odd occasions they were used for passenger duties such as deputising for a Class 33 on Clapham Junction-Kensington Olympia services! The 09s originally were largely restricted to Southern Region but in the privatised era they can be found much wider afield. Ten have been preserved including one used as the National Railway Museum's yard shunter.

EWS liveried 09 001 at the Heritage Shunter Trust

D4100 at Kidderminster SVR

The National Railway Museum's 09 017

09 001 next to 03 099

Another view of 09 017

D4100 amid Class 50s

[1] Brian Haresnape, Diesel Shunters (Ian Allan, 1984) p. 71
[2] Colin J. Marsden, Traction Recognition (Second Edition) (Ian Allan, 2008) p. 12
[3] Colin J. Marsden, Diesel & Electric Locomotive Recognition Guide (Ian Allan, 2011) p. 90

City and South London Railway Locomotives

The City & South London Railway, which opened in 1890 between Stockwell and King William Street, was the first deep-level tube railway and the first major railway to use electric traction. To haul trains the C&SLR ordered a number of electric locomotives. The first two were built by Mather & Platt in 1889 in conjunction with Beyer Peacock [1] who provided the bodywork. The C&SLR ordered a production series of twelve others of a similar configuration. Later on more locomotives were built to augment the fleet from a variety of different manufacturers including the C&SLR itself though all followed the same design though with different equipment.

Information
Number built:	52
Built:	1889-1901
Builder:	Mather & Platt, Siemens, C&SL Stockwell Works, Crompton & Company, Electric Construction Company, Thames Ironworks
Engine:	2 Edison-Hopkinson traction motors (500v DC third rail)
Power:	100 hp (75 kW)
Wheel arrangement:	4w

The C&SLR tunnel had a very limited diameter of just over three metres with a rolling stock gauge just over two metres wide. The C&SLR Locomotives were only three metres long. The locomotives has two electric motors controlled by a hand-operated rotary controller. The controller was originally mounted vertically with exposed electrical contacts but later a horizontal enclosed controller similar to those used on electric trams was used.

The C&SLR locomotives hauled trains of three passenger coaches. At each terminus the locomotive would be uncoupled and another locomotive following behind would be coupled to the other end to take the train back. The tiny locomotives struggled with fully loaded trains especially with the steep gradients and twisty tunnels at King William Street. Sometimes the locomotive would not make it and the driver had to back the train back down to the level part of the tunnel (under the Thames) and make another attempt! [4] When the C&SLR extended Northwards to Moorgate King William Street as closed in 1900, earning it the dubious honour of being the first tube station to close. Without the restrictions of King William Street the C&SLR could operate longer trains.

Later locomotives had four-pole motors, built-in air compressors (the earlier locomotives filled a reservoir at Stockwell for their brakes) and nose-suspended motors though the limited tunnel dimensions meant the external appearance of the locomotives did not change much. The C&SLR was closed for reconstruction in the early 1920s, the tunnels being widened to match other (and later) tube lines. This now allowed the C&SLR line (which became part of the Northern Line) to use Standard Stock. The C&SLR locomotives were withdrawn by 1925. One has been preserved.

Preserved C&SLR Locomotive #13 at London Transport Museum

Inside the cab of the preserved locomotive

C&SLR Locomotive and it's train, public domain image [2] 

Drawing of C&SLR train, public domain image [3]

[1] Piers Connor, The London Underground Electric Train (Crowood Press, 2015) p.10 
[2] "City & South London", The Street Railway Review Vol. 3 (1893) p. 590
[3] "London's Subterranean Electric Railway", The Electric Railway Gazette No.12 (December 1890) p. 231
[4] J.E. Connor, London's Disused Underground Stations (Capital Transport, 2012) p. 9

LNER J45 (LNER Doncaster / English Electric or Brush 350hp Diesel-Electric)

All of the "Big 4" railway companies were experimenting with diesel shunters by the late 1930s and 1940s for economic and operational reasons. The LNER was the last to join the party with an order for four locomotives based on the LMS/EE design which led to the Class 08 (and would soon become very familiar indeed). The LNER J45 differed in cab design, had vacuum brakes and had a slightly longer wheel base [1]. The shunters were numbered 8000-8003 but within a couple of years were renumbered 15000-15003 by BR. Later they were given class names DES1, DEJ1, D3/9 and 3/10 but never received TOPS numbers.

Information
Number built:	5
Built:	1944 (15004) 1947
Builder:	LNER Doncaster (15004) Brush
Engine:	English Electric 6KT diesel (15004) Brush Petter S54 diesel
Power:	350 hp (261 kW) (15004) 360hp (268 kW)
Wheel arrangement:	0-6-0

A fifth shunter was built by Brush for the LNER to a similar design but with Brush equipment. 15004 (it was delivered after Nationalisation so received a BR number) had some external differences including the lack of a battery box on the side as it used compressed air to start the engine [2]. The shunter operated under trial for a couple of years before being accepted into BR service in 1949. It was given the original class name DES2, later DEJ2, D3/14 and 3/2.

The shunters were originally sent to work at Whitemoor yard though also could be seen working elsewhere [3]. LNER had planned to build one hundred and sixty seven more of these shunters (either with EE or Brush equipment) though Nationalisation put paid to these plans. The four original locomotives continued in BR service until 1967 when they were withdrawn. 15004, having a slightly less successful time with reliability and being a one-off, was withdrawn in 1962.

LNER liveried 8003 at Whitemoor in 1949 (KD Collection)

15004 at Whitemoor in 1949, note the lack of the battery box on the side (KD Collection)

[1] Brian Haresnape, Diesel Shunters (Ian Allan, 1984) p. 30
[2] Ibid. p. 31
[3] Colin J Marsden, Diesel & Electric Locomotive Recognition Guide (Ian Allan, 2011) p. 14